Gauging interest in 3.63 gears
#1
Senior Member
Thread Starter
iTrader: (10)
Join Date: Jul 2009
Location: Oakdale, CA
Posts: 1,394
Total Cats: 123
Gauging interest in 3.63 gears
After speaking with Dan, I have volunteered to receive these gears and then ship them out to people interested in them. So once we figure out what the interest is Dan can get a price. Maybe he can chime in and fill everyone in on what would be needed.
Thanks,
Ryan
Thanks,
Ryan
#4
Elite Member
iTrader: (13)
Join Date: Dec 2006
Location: Taos, New mexico
Posts: 6,612
Total Cats: 567
Are these plug in play into a standard 94-04 housing? As in, do I need to set lash, or anything else when installing, or can I do this in my garage with a BFH and some RTV?
I'd be interested if we are talking sub $500 range after shipping and whatnot.
I'd be interested if we are talking sub $500 range after shipping and whatnot.
#11
Senior Member
iTrader: (1)
Join Date: Jan 2011
Location: Chattanooga, Tn
Posts: 1,234
Total Cats: 283
To be clear. you WILL have to verify backlash, pinion depth and pinion bearing preload(which WILL require a new crush sleeve) at a MINIMUM.
It would suck to get in on this and junk the gears after not having them properly set up. If you have to ask if this even needs to be done, it's not a job you can do.
It would suck to get in on this and junk the gears after not having them properly set up. If you have to ask if this even needs to be done, it's not a job you can do.