Notices
General Miata Chat A place to talk about anything Miata

GS rad and shroud install problemo

Thread Tools
 
Search this Thread
 
Old Apr 8, 2008 | 05:32 PM
  #41  
Atlanta93LE's Avatar
Elite Member
iTrader: (5)
 
Joined: Sep 2006
Posts: 2,195
Total Cats: 1
From: Marietta, GA
Default

Originally Posted by miataz
Okay i put the on-off limit to 247 cause you said its -40 so that means they go on at 207deg right, and then i put the off hysteresis to 50 so that means they turn off at 197. Am i correct?
Sort of. You're ok on the 247, but I'd go with more like 240 to start with. But 50 on the hysteresis is ridiculous. Leave it at 5. But go test it; at what temp does the fan come on with the changes? Does it decrease temps? If so, what temp do they turn off? Test at idle and at speed...does the temp decrease at idle with the fans alone, or does it take some air movement (car at speed) to get temps low enough for fans to turn off?

But seriously...don't do something because that's what some Joe Blow on the interweb said. Read what they said, understand how/why, and verify against the sources at your disposal. Then do something because you actually understand what you're doing.
Old Apr 8, 2008 | 08:57 PM
  #42  
jasonrobo02's Avatar
Senior Member
iTrader: (13)
 
Joined: Sep 2006
Posts: 606
Total Cats: 0
From: San Diego
Default

Originally Posted by Atlanta93LE
But seriously...don't do something because that's what some Joe Blow on the interweb said. Read what they said, understand how/why, and verify against the sources at your disposal. Then do something because you actually understand what you're doing.
This should be shown on the google homepage to let everyone know what the proper procedure for using internet advice is.
Old Apr 8, 2008 | 10:56 PM
  #43  
miataz's Avatar
Thread Starter
I'm Miserable!
iTrader: (1)
 
Joined: Oct 2007
Posts: 979
Total Cats: 0
From: Niagara Falls, On, CANADA
Default

Originally Posted by Atlanta93LE
Sort of. You're ok on the 247, but I'd go with more like 240 to start with. But 50 on the hysteresis is ridiculous. Leave it at 5. But go test it; at what temp does the fan come on with the changes? Does it decrease temps? If so, what temp do they turn off? Test at idle and at speed...does the temp decrease at idle with the fans alone, or does it take some air movement (car at speed) to get temps low enough for fans to turn off?

But seriously...don't do something because that's what some Joe Blow on the interweb said. Read what they said, understand how/why, and verify against the sources at your disposal. Then do something because you actually understand what you're doing.
Alright thanks for all the info, and the hottest it got was 187 so it really never got hot enough for me to check if they went on cause i only drove around the block cause my insurance doesn't start till Friday , but when it does i will check from there thank you once again. And i really dont give a **** if im on your ignore list i already have a fan club...
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
Sep 30, 2018 01:09 PM
nick470
MEGAsquirt
7
Jun 16, 2017 01:53 PM
stoves
Suspension, Brakes, Drivetrain
5
Apr 21, 2016 03:00 PM
lsc224
Miata parts for sale/trade
2
Oct 1, 2015 09:17 AM
JesseTheNoob
DIY Turbo Discussion
15
Sep 30, 2015 02:44 PM




All times are GMT -4. The time now is 08:41 PM.