My DIY wheel paint job!
#25
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,501
Total Cats: 4,080
you have to sand them down a little to scratch the coating surface so the paint sticks....I acutally used a wire brush on my drill and completely removed the factory seal/paint.
did it while the tires were still mounted, just taped off the valve stem, and let out all the air so you can stick note cards around the edge. that's it.
before (sanded) and after (painted):
did it while the tires were still mounted, just taped off the valve stem, and let out all the air so you can stick note cards around the edge. that's it.
before (sanded) and after (painted):
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM