where to get ECU connectors
#2
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,027
Total Cats: 6,593
By dismantling the ECU out of a junked 2001 Miata
By cutting the harness out of a junked '94-'95 Miata.
Ok, seriously... The folks at Boomslang make harnesses for these combinations. It's quite likely that they'd sell you the connectors, possibly with pins already crimped and inserted.
DIYAutoTune would also be a good one to contact, as they obviously have access to various ECU-side connectors.
ECU connectors to plug into *ECU*, 90-95
Ok, seriously... The folks at Boomslang make harnesses for these combinations. It's quite likely that they'd sell you the connectors, possibly with pins already crimped and inserted.
DIYAutoTune would also be a good one to contact, as they obviously have access to various ECU-side connectors.
#4
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,494
Total Cats: 4,080
(1) 64 pin ECU Male Receptacle PN: 174518-7 (oem harness plugs into it)
(1) 22 pin Female Plug (plug into ecu) PN: 174515-6
(1) 26 pin Female Plug (plug into ecu) PN: 174516-6
(1) 16 pin Female Plug (plug into ecu) PN: 174514-6
(16) .070" contact PN: 173631-6
(48) .040" contact PN: 173716-1
changing the -X changes the material used or color, so if they don't have in stock search for it without the -1 or -6.
onlinecomponents.com, but like Brian said, $30 minimum plus shipping. that about $20 worth of parts.
you'll need about 40-45' of 18awg stranded wire, and about 2-3 hours of your time.
if you only need the plugs for a 90-95 miata, then take off 16 .040" pins and the 16 pin plug.
(1) 22 pin Female Plug (plug into ecu) PN: 174515-6
(1) 26 pin Female Plug (plug into ecu) PN: 174516-6
(1) 16 pin Female Plug (plug into ecu) PN: 174514-6
(16) .070" contact PN: 173631-6
(48) .040" contact PN: 173716-1
changing the -X changes the material used or color, so if they don't have in stock search for it without the -1 or -6.
onlinecomponents.com, but like Brian said, $30 minimum plus shipping. that about $20 worth of parts.
you'll need about 40-45' of 18awg stranded wire, and about 2-3 hours of your time.
if you only need the plugs for a 90-95 miata, then take off 16 .040" pins and the 16 pin plug.
Thread
Thread Starter
Forum
Replies
Last Post
bigmackloud
Miata parts for sale/trade
19
01-08-2021 11:24 AM