Enhanced Megasquirt Group Buy for all Miatas (90-05)
#285
Elite Member
Thread Starter
iTrader: (10)
Join Date: Jun 2006
Location: Athens, Greece
Posts: 5,978
Total Cats: 356
Also, I would advise that you first test start the car before cutting and extending.
#287
How longer would you prefer them to be? Genuine question here. I've installed two of these so far in local's cars and didn't have any problems with the wires being "short", however these being euro cars, the ECU location is the same as in the 90-93 cars.
Also, I would advise that you first test start the car before cutting and extending.
Also, I would advise that you first test start the car before cutting and extending.
But seeing as i'm going with the hot swap set up with my 99 and 02 and 2 different map tunes. I would need the ecu somewhere like the glove box or passenger side firewall to make it easy to quickly remove and install.
Which of these should i order?
http://www.diyautotune.com/catalog/m...ong-p-452.html
http://www.diyautotune.com/catalog/m...ong-p-101.html
#288
Elite Member
Thread Starter
iTrader: (10)
Join Date: Jun 2006
Location: Athens, Greece
Posts: 5,978
Total Cats: 356
On a american nb the ecu is above the steering shaft. On my 99 it's fine as i will remove the stock ecu and everything else under the dash to lose weight and have easy access but the 02 the stock ecu will be left in for emotions testing easy switching.
But seeing as i'm going with the hot swap set up with my 99 and 02 and 2 different map tunes. I would need the ecu somewhere like the glove box or passenger side firewall to make it easy to quickly remove and install.
Which of these should i order?
http://www.diyautotune.com/catalog/m...ong-p-452.html
http://www.diyautotune.com/catalog/m...ong-p-101.html
But seeing as i'm going with the hot swap set up with my 99 and 02 and 2 different map tunes. I would need the ecu somewhere like the glove box or passenger side firewall to make it easy to quickly remove and install.
Which of these should i order?
http://www.diyautotune.com/catalog/m...ong-p-452.html
http://www.diyautotune.com/catalog/m...ong-p-101.html
I would also recommend that you use TXL "thinwall" wiring instead - it is lighter, tougher and more flexible.
#289
I really only need to make the 02 harness longer. Can you give me a link to what your talking about or are you saying get http://www.diyautotune.com/catalog/m...ong-p-101.html
#292
b) Grey - Switchable tables. Connect this to a ground (through an on/off
switch) to switch between VE/Ignition tables.
c) Brown - Launch control. Connect this to a ground (through an on/off switch)
to switch launch control on/off.
d) Violet (purple) - Boost control low/high. Connect this to a ground
what if i'm not using any of these?
switch) to switch between VE/Ignition tables.
c) Brown - Launch control. Connect this to a ground (through an on/off switch)
to switch launch control on/off.
d) Violet (purple) - Boost control low/high. Connect this to a ground
what if i'm not using any of these?
#294
Elite Member
Thread Starter
iTrader: (10)
Join Date: Jun 2006
Location: Athens, Greece
Posts: 5,978
Total Cats: 356
b) Grey - Switchable tables. Connect this to a ground (through an on/off
switch) to switch between VE/Ignition tables.
c) Brown - Launch control. Connect this to a ground (through an on/off switch)
to switch launch control on/off.
d) Violet (purple) - Boost control low/high. Connect this to a ground
what if i'm not using any of these?
switch) to switch between VE/Ignition tables.
c) Brown - Launch control. Connect this to a ground (through an on/off switch)
to switch launch control on/off.
d) Violet (purple) - Boost control low/high. Connect this to a ground
what if i'm not using any of these?