When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
If you build a room in a room like DeerHunter or use resilient channel, you have space for cabling. I used resilient channel and rubber spacers for my master bedroom to decouple from the living room and ceiling. Not as good as completely separate framing, but it's quite good with the spacers.
I'm referring more to cable access from the living room to other areas of the house, such as for ethernet. Fortunately, there is one RG-6 coax drop there, and I'm embracing the wonderfulness of MoCA in this house.
As for sound-isolation, well, I'm in a situation where I really just don't care. The walls of this house are brick, the windows double-paned and fairly stout, and I have already determined empirically there's very little bleed from inside to outside.
I have neighbors putting up Christmas decorations already so figured this is appropriate.
The War on Christmas shall not end, for so long as Chancellor Kringle and the Elven Army continue to flagrantly ignore the boundaries to which they agreed at the Plymouth Treaty Accord of 1621.
I'm certainly not a qualified fire investigator, but the right-rear corner of that NB sure seems like it is more heavily damaged than the rest of the car.
Before my divorce, we built a custom house in which I made sure to spec out a home theatre room in the basement. I did oodles of research, figuring out the ideal room dimensions to optimize sound, plus the best way to insulate it for sound (so I could enjoy movies at ear-splitting volumes without disturbing my then-wife):
The interior frame was decoupled from the rest of the house:
All wiring for networking, speakers and ceiling-mounted projector was pre-installed (as future-proofed as I could make it at the time).
The walls were decoupled from the interior frame using acoustic spacers, plus double-sheets of drywall and blow-in insulation:
The ceiling (also two layers of drywall) was hung from acoustic decoupling springs:
All these decouplers and drywall were installed and hung by me and my two brothers, and it was quite the task. We left the finishing to the builder.
A platform was included, for better sightlines in the back row:
And it was painted a neutral grey (so that reflections off the wall wouldn't wash out the projected image):
Carpet was also a neutral colour:
For some reason, I can't locate pictures of the finished room. It had custom recliners for four in the back, a 720P projector (1080P was ludicrously expensive at the time), THX 7.1 sound and a 100" 16:9 screen. The speakers I chose were ridiculously good, as was the amp and source equipment (DVD and Laserdisc only, as this was before Blu-ray). An 18" sub filled in the low end (and was the reason for all the insulation).
If I had to do it again, I would do a few things differently. First, decoupling the floor would have been relatively easy to do and would've helped soundproofing. Second, the door was insufficient to the task:
It was an insulated, outdoor-spec door but definitely the weak link. The correct way to do it is with a small atrium (i.e. two doors) and that would've prevented more than a few "turn it down!" admonitions. Finally, I didn't think to add more HVAC. With all the equipment going, the room heated up quite quickly and eventually the door would have to be opened in any case. More ventilation would've helped but a third, independent, HVAC zone would've been ideal. As with any project, you have to go through it once (or thrice) before you figure out the correct way to do things.
Regardless, it was a fantastic place to watch a movie or concert, and I miss it very, very much.
When you guys talk about soundproofing the basement and then adding a heavy-duty door, I just can't help but wonder if I've wandered into a thrill kill cult.
11-15-2021, 03:18 PM
0
