metal salad
#43
Senior Member
Thread Starter
iTrader: (4)
Join Date: Oct 2005
Location: South Carolina
Posts: 582
Total Cats: 0
thanks
yep, heh, its open
turns out that whining sound i was hearing every since i bought the car was the diffs bearings, no more sound man i thought that was my tranny for 2 years now. bad bearings probly is what killed the diff i am thinking.
yep, heh, its open
turns out that whining sound i was hearing every since i bought the car was the diffs bearings, no more sound man i thought that was my tranny for 2 years now. bad bearings probly is what killed the diff i am thinking.
#44
1.6 diffs generally die due to poor lubrication to the pinion bearing. The diff isn't designed that well and the pinion bearing doesn't get enough lube. The bearing wears, you get slack between the pinion and ring, and then you get what you have there.
Love the upper shock mounts. I have a set of M2 mounts that I have been very tempted to convert to somthing similar with a piece of pipe, but worried about strength. After looking at yours I think I may just have to go for it. Did you do any calculations as far as how high to stick the mount, or just go with what looked good?
Love the upper shock mounts. I have a set of M2 mounts that I have been very tempted to convert to somthing similar with a piece of pipe, but worried about strength. After looking at yours I think I may just have to go for it. Did you do any calculations as far as how high to stick the mount, or just go with what looked good?
Last edited by matttheniceguy; 05-08-2007 at 03:54 AM.
#45
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,501
Total Cats: 4,080
Considering it shares that same "design" as the 1.8L counterpart that is nearly bulletproof when it comes to adding power, I'm still going to assume it's simply too small of a ringgear to handle torque, plain and simple.
#46
Senior Member
Thread Starter
iTrader: (4)
Join Date: Oct 2005
Location: South Carolina
Posts: 582
Total Cats: 0
1.6 diffs generally die due to poor lubrication to the pinion bearing. The diff isn't designed that well and the pinion bearing doesn't get enough lube. The bearing wears, you get slack between the pinion and ring, and then you get what you have there.
Love the upper shock mounts. I have a set of M2 mounts that I have been very tempted to convert to somthing similar with a piece of pipe, but worried about strength. After looking at yours I think I may just have to go for it. Did you do any calculations as far as how high to stick the mount, or just go with what looked good?
Love the upper shock mounts. I have a set of M2 mounts that I have been very tempted to convert to somthing similar with a piece of pipe, but worried about strength. After looking at yours I think I may just have to go for it. Did you do any calculations as far as how high to stick the mount, or just go with what looked good?
all 1/8" mild. 1.25" welded bolts to the mount. 1/8" wall tubing and stick welded tubing to top circle peice for extra strength, all else is tig'd. spring perch hat is 3.5" across and the tubing for the 1.75" stretch at the tope is 2.5" od, enjoy
#47
ah yes, reminds me of my metal caesar salad, mine was not drivable at all though after it happened. i blew one of the spider gears apart. i also, had an open 1.8 diff chillin in the garage for swap. but i made an oath to myself not to own another open diff... so, i swapped it out with a 1st generation rx7 lsd carrier and 3.90 final drive. much better. this one is holding the abuse just fine. i like how stripped down your car is, its gangsta.
#48
I got the info about lube problems from a local diff shop that does rebuilds on miata diffs. Apparantly if you take one that hasn't blown appart yet, there is usually a fair bit of wear and slop in the pinion bearing. They replace that bearing, and all the others, and run the diffs on heavier oil. Apparantly after doing that the 1.6 diffs have no problems (of course this rebuild costs nearly as much as a 1.8 diff, so why bother).
Thread
Thread Starter
Forum
Replies
Last Post
russian
Miata parts for sale/trade
6
10-08-2015 03:01 PM
itsMikey
Insert BS here
0
09-05-2015 02:56 PM