Free dyno time! (for me)
#1
Cpt. Slow
Thread Starter
iTrader: (25)
Join Date: Oct 2005
Location: Oregon City, OR
Posts: 14,224
Total Cats: 1,146
Free dyno time! (for me)
The shop I work for just got a DynoJet installed. I so far have tuned zero miatas on it, and I have zero free time available to get my own on it. But there's a quite a few projects of mine waiting on a few parts that will eventually allow me to use the damn thing.
In the mean time, here's an e90 we put a P65 in.
https://fb.watch/b3wZrUR3AA/
Sooner or later though, I've got a square top intake manifold that needs to justify it's existence, and I may take the opportunity to play around with either race gas or E85 to get close to 400.
In the mean time, here's an e90 we put a P65 in.
https://fb.watch/b3wZrUR3AA/
Sooner or later though, I've got a square top intake manifold that needs to justify it's existence, and I may take the opportunity to play around with either race gas or E85 to get close to 400.
#3
Cpt. Slow
Thread Starter
iTrader: (25)
Join Date: Oct 2005
Location: Oregon City, OR
Posts: 14,224
Total Cats: 1,146
Seriously. Bring your corvette down!
Finally did get a chance to use it. First a 10ae with an FM turbo kit and stock clutch. That ended quickly. Then my car to verify everything’s healthy and comparative to the last dyno it was at.
This wastegate, 19psi, and after I let it cool for 5 or so minutes.
next I need to find what’s filling my catch can and intercooler pipes with oil. Either positive crank case pressure I need to vent, or less likely, efr seal issues.
Finally did get a chance to use it. First a 10ae with an FM turbo kit and stock clutch. That ended quickly. Then my car to verify everything’s healthy and comparative to the last dyno it was at.
This wastegate, 19psi, and after I let it cool for 5 or so minutes.
next I need to find what’s filling my catch can and intercooler pipes with oil. Either positive crank case pressure I need to vent, or less likely, efr seal issues.
Last edited by curly; 02-13-2022 at 10:00 PM.
Thread
Thread Starter
Forum
Replies
Last Post