Notices
Meet and Greet Say Hi. De-noob yourself.

UK Mazda 10th edition - Turbocharged owner

Old Feb 2, 2016 | 06:54 PM
  #1  
Jay.Egocentrical's Avatar
Thread Starter
Newb
 
Joined: Feb 2016
Posts: 9
Total Cats: -10
Default UK Mazda 10th edition - Turbocharged owner

Hi Guys,

Lurked these forums for a while however never signed up.

Previously owned a 1999 Mazda 1.8 sport, racing bronze - N/A that has a total of only 65,000 Miles on it
I've owned this car for around 6 Months now, and I was originally planning to Turbo this myself however after browsing through Ebay each day I finally came across a turbo'd MX5 that spoke to me.

As of today - I am now an owner of a 10th Edition Mazda MX5 Turbocharged - the specs of the car at present are;

1.8ltr
6 speed
Stainless exhaust system
Emerald stand alone ECU
Turbo conversion running approx 13psi
Front Mount intercooler
Greedy wastegate
Blitz dump valve
Correct plugs recently fitted
Just had oil and filter change.
Lowering springs.
Updated anti roll bars front and rear.
Welded diff
17" Kiosie alloys
Bradded brake lines
Strut brace
Boost gauge
Roll bar
74,00 miles

Don't have any of my own pictures at present but took a few of the listing to show;










I am now currently broke until I'm paid or sell my other car (hopefully soon)

Things I need to get -
New clutch/flywheel. At the moment it's like trying to find the Gspot for a girl - difficult. However I'm getting use to it but it's definitely not something I want to deal with to long.
Get a new Hard top - just look baller.
Fix the stereo (Buy an aftermarket headunit basically).
Fix the front bumper as there a split which has been zip tied
Clean up the engine bay - Paint etc

- would like some suggestions if at all possible?
Attached Thumbnails UK Mazda 10th edition - Turbocharged owner-80-_57_4eea6d85d0c970a4eb396bf075d2ff2275a31aa4.jpg   UK Mazda 10th edition - Turbocharged owner-80-_57_2__b71bd7b1a4f22d123245fae0b935b0925e9c983b.jpg   UK Mazda 10th edition - Turbocharged owner-80-_57_1__df299ad3280fbe38e00f4c63541ab3684685628f.jpg  
Old Feb 2, 2016 | 08:15 PM
  #2  
Lokiel's Avatar
All-round "Good Guy"
 
Joined: Dec 2009
Posts: 1,036
Total Cats: 266
From: Brisbane, AUSTRALIA
Default

The car looks great, always been a fan of that colour.

I'm surprised the PO turbocharged a 10AE. As a limited edition it's worth more stock than modified.

What's with the welded diff? I thought these came with a LSD.

For the cheap options:

Wrinkle Black will do wonders for the rusty intercooler plumbing and rocker cover - if you can get Wrinkle Blue to match the car colour that'd be even "purdier" for the rocker cover.

For the front strut brace you could use roll bar paint:

(not sure if you can use this on the intercooler plumbing - may be too hot for it).

Forget about the stereo - you wont listen to it much anyway unless you're stuck in traffic. If you must have it, keep it as cheap as possible, no point getting a high-end system in a convertible (also makes your car less likely to be broken into).

Down the track:

15" or 16" rims are MUCH nicer on NA/NBs, the ride and handling are much improved, and tyres are cheaper.

The MSM came with 17" rims and those of us that switched to smaller rims tend not to return to them.
Attached Thumbnails UK Mazda 10th edition - Turbocharged owner-80-ab1384_11oz_aerosol_vht_roll_bar_chassis_paint_satin_black_high_temp_sp671_a5ec7648bf820a281f.jpg  
Old Feb 3, 2016 | 10:35 AM
  #3  
Braineack's Avatar
Boost Czar
iTrader: (62)
 
Joined: May 2005
Posts: 80,552
Total Cats: 4,368
From: Chantilly, VA
Default

Jay.Egocentrical, congrats on signing up at the best site on the web!
Old Feb 3, 2016 | 05:44 PM
  #4  
Jay.Egocentrical's Avatar
Thread Starter
Newb
 
Joined: Feb 2016
Posts: 9
Total Cats: -10
Default

Originally Posted by Lokiel
The car looks great, always been a fan of that colour.

I'm surprised the PO turbocharged a 10AE. As a limited edition it's worth more stock than modified.

What's with the welded diff? I thought these came with a LSD.

For the cheap options:

Wrinkle Black will do wonders for the rusty intercooler plumbing and rocker cover - if you can get Wrinkle Blue to match the car colour that'd be even "purdier" for the rocker cover.

For the front strut brace you could use roll bar paint:

(not sure if you can use this on the intercooler plumbing - may be too hot for it).

Forget about the stereo - you wont listen to it much anyway unless you're stuck in traffic. If you must have it, keep it as cheap as possible, no point getting a high-end system in a convertible (also makes your car less likely to be broken into).

Down the track:

15" or 16" rims are MUCH nicer on NA/NBs, the ride and handling are much improved, and tyres are cheaper.

The MSM came with 17" rims and those of us that switched to smaller rims tend not to return to them.
Cheers lad's - first thing to now do is after taking it out for a spin, my front tire decided to blow out and i'm now sitting on space saver Soooo - new tires and clutch needed.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Hot_Wheels
Miata parts for sale/trade
11
Feb 8, 2016 06:08 PM
johnp2
Miata parts for sale/trade
10
Jan 18, 2016 10:09 PM
njn63
Miata parts for sale/trade
2
Jan 10, 2016 07:54 PM
squeegee
DIY Turbo Discussion
43
Jan 8, 2016 11:58 AM


Thread Tools
Search this Thread

All times are GMT -4. The time now is 01:47 PM.