6 position switch (5 x Rotary Switch Potentiometer 2pole 6POSITION 15pin | eBay)

A resistor network. (Chief Delphi - View Profile: ZZII 527)

This will give me a 0-5V input in 6 steps.

Set this up as a linear sensor in tunerstudio



Set up boost blending. Max boost in table 2, min boost in table 1.

Have 6 levels of boost control!! Wooo

Same switch can be used for launch control and traction control

 

why?

how about just not suck?

 

um...to show off at car meets? duh

Why the **** else would you do it

 

fair nuff.

 

 

Cool, but even cooler if you set the X axis to react based on Flex%, which is what I plan to do

 

Orrrr, you do a dual table flex blend using Blend Curve (8). And the **** based table Blend Curve (6). Then you have 6 positions of boost that also vary based on ethanol content.*



(either way you should be using Blend Curve 8 for Flex blending, because it effects all of the tables.)

*I have not tried this. And I'm not at my car to see if the MS freaks out if I set it up like this.

 

Interested in outcome from both of you.

 

Mine will be boring. I'm on a stock 1.6. Sav's will be epic.

 

blending both based on ethanol content sounds epic.

work out the details so I can hop on the bandwagon

 

Details are worked out

See flex fuel thread and this thread.

 

You have this completely ironed out and working perfectly?

 

I mean in my brain it is, thats pretty much the same right?

 

where's the -props button

 

Thankfully gone.

 

 

I have all of the parts and none of the time It will happen eventually.

 

Ive blended boost based on E% on a Rev MS3. I was very happy with the outcome.

Dann

 

Yes. Blending boost tables on ethanol % is awesome.

Vlad just for you I'm going to talk yank into doing this on his car. Because he is already running flex fuel and boost control.

 

sure