Ive been running this megasquirt on my turbo miata for a while now and Im very impressed with it and would like to dive into some of the deeper features.

I did a search for launch control wiring using the clutch switch, or any switch for that matter and all I seem to bring up is 99 models, it looks to me like their clutch input comes into the ECU on the stock harness.

Is this so with the 93 model as well? The wiring document I have doesnt disclose whether or not it does.

Thanks in advance

 

Yes the wiring comes to the ecu. Do more reading. Its talkes about it in the manual.

 

All i have is the jumper configuration, nothing else. Then I have the general manual not the vehicle specific manual.

 

Ever used google.....?


http://www.megasquirtpnp.com/docs/ms...r=13&isModel=2

 

Yep, 1V on harness, into MS to JS11. turn it on in mega tune, the end.

It if have/had cruise control, you need to remove the neutral switch circuit, as it causes the the signal to ground at the wrong time, ie not in gear.


^^^^^^
That is actually the answer I was looking for and it was found in a thread on page 25 of a google search.

What you linked me is what I already have, a generalization.

EDIT- I also have a DIY pnp module, not the PNP one, so my 26pin connector is not populated to any inputs on the main board.