Anyone wanna give my fuel and spark tables a look over?
#41
Elite Member
Thread Starter
iTrader: (11)
Join Date: Jun 2007
Location: Meriden, CT
Posts: 2,065
Total Cats: 1
After some thought, I figured I'd see if I could come up with a new "base" spark table by combining my existing one and the example posted...up top I figured I'd stay closer to my existing settings since I havn't had any catastrophic issues with it. I'm thinking that this may be a better starting point than the table that is loaded in my car now, any thoughts, concerns, recommendations? Any and all feedback would be appreciated!
ProposedSparkTable.jpg?t=1270089638
ProposedSparkTable.jpg?t=1270089638
#43
Elite Member
Thread Starter
iTrader: (11)
Join Date: Jun 2007
Location: Meriden, CT
Posts: 2,065
Total Cats: 1
I'm just a nervous nelly, lol. Yea, I figured dialing in the fuel would be the first order of business. Whats the best technique? Start it off rich (already the case for me) and then slowly scale the table back to get my afr's where I want them?
#44
Yeah you gotta do logs of different stages of boost and rpms and start adjusting it... Idk if MS has auto tune but the link does so I auto tune it first and then from there I do logs and adjust.... It's way easier to do it on a dyno or with a friend on the passanger seat and laptop. It's time consuming and a pain but the more you understand it the more fun it gets. Btw what does your AF target table look like?
#47
Tour de Franzia
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
Please, explain to us why "finding MBT" will cause damage. I really want to hear this. I also look forward to people taking advice from ricers with Cracker Jack, anime trash wheels from the Hella AIDS crew.
#48
Im not a pro at tunning but my car has been turbo'd for 4 traes and never blew my motor so i say I'm not to bad at tunning. I'm not a race car driver so I don't need light wheels, I like my rice wheels. At least I'm not like the other idiots who need 195s and alot of camber to be hella flush bullshit.
I'm not gonna start e-thugging like you do but I would put my life on it that Ive seen and **** way more ***** then you ever did. Jerking off looking out the window of a second floor doesn't count as getting laid. Anyways we are all here to learn and take advice , if you remember correctly you had no clue about anything a year ago and now you learned and try to put people down to make you feel better about your self. We all know you have a low self of steem so that's why you need to put people down....I don't have any problems with anyone here so relax and instead of putting me down try to be more productive and teach me.
Alright I'm over it, I tought MBT would be like if I found that 18* at like 4-4.5 rpm 18psi was the max timing I could run without detonation and gaining torque so set the timming back to like 15* at 4500rpm 18psi to be safe and then I could add 5* towards redline... Example 15* at 4k...17* at 5k...19* at 6k...20* at 7k.... Now that was the way I thought you explained it and if it's wrong discard what I said and please explain to me.... So that's why I said that doing it that way wasn't safe cause he would be running 20* at 18psi
I'm not gonna start e-thugging like you do but I would put my life on it that Ive seen and **** way more ***** then you ever did. Jerking off looking out the window of a second floor doesn't count as getting laid. Anyways we are all here to learn and take advice , if you remember correctly you had no clue about anything a year ago and now you learned and try to put people down to make you feel better about your self. We all know you have a low self of steem so that's why you need to put people down....I don't have any problems with anyone here so relax and instead of putting me down try to be more productive and teach me.
Alright I'm over it, I tought MBT would be like if I found that 18* at like 4-4.5 rpm 18psi was the max timing I could run without detonation and gaining torque so set the timming back to like 15* at 4500rpm 18psi to be safe and then I could add 5* towards redline... Example 15* at 4k...17* at 5k...19* at 6k...20* at 7k.... Now that was the way I thought you explained it and if it's wrong discard what I said and please explain to me.... So that's why I said that doing it that way wasn't safe cause he would be running 20* at 18psi
#50
Tour de Franzia
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
Im not a pro at tunning but my car has been turbo'd for 4 traes and never blew my motor so i say I'm not to bad at tunning. I'm not a race car driver so I don't need light wheels, I like my rice wheels. At least I'm not like the other idiots who need 195s and alot of camber to be hella flush bullshit.
I'm not gonna start e-thugging like you do but I would put my life on it that Ive seen and **** way more ***** then you ever did. Jerking off looking out the window of a second floor doesn't count as getting laid. Anyways we are all here to learn and take advice , if you remember correctly you had no clue about anything a year ago and now you learned and try to put people down to make you feel better about your self. We all know you have a low self of steem so that's why you need to put people down....I don't have any problems with anyone here so relax and instead of putting me down try to be more productive and teach me.
Alright I'm over it, I tought MBT would be like if I found that 18* at like 4-4.5 rpm 18psi was the max timing I could run without detonation and gaining torque so set the timming back to like 15* at 4500rpm 18psi to be safe and then I could add 5* towards redline... Example 15* at 4k...17* at 5k...19* at 6k...20* at 7k.... Now that was the way I thought you explained it and if it's wrong discard what I said and please explain to me.... So that's why I said that doing it that way wasn't safe cause he would be running 20* at 18psi
I'm not gonna start e-thugging like you do but I would put my life on it that Ive seen and **** way more ***** then you ever did. Jerking off looking out the window of a second floor doesn't count as getting laid. Anyways we are all here to learn and take advice , if you remember correctly you had no clue about anything a year ago and now you learned and try to put people down to make you feel better about your self. We all know you have a low self of steem so that's why you need to put people down....I don't have any problems with anyone here so relax and instead of putting me down try to be more productive and teach me.
Alright I'm over it, I tought MBT would be like if I found that 18* at like 4-4.5 rpm 18psi was the max timing I could run without detonation and gaining torque so set the timming back to like 15* at 4500rpm 18psi to be safe and then I could add 5* towards redline... Example 15* at 4k...17* at 5k...19* at 6k...20* at 7k.... Now that was the way I thought you explained it and if it's wrong discard what I said and please explain to me.... So that's why I said that doing it that way wasn't safe cause he would be running 20* at 18psi
Adjusting a spark table without a dyno is too dangerous for my money.
#52
Elite Member
Thread Starter
iTrader: (11)
Join Date: Jun 2007
Location: Meriden, CT
Posts: 2,065
Total Cats: 1
Alright I'm over it, I tought MBT would be like if I found that 18* at like 4-4.5 rpm 18psi was the max timing I could run without detonation and gaining torque so set the timming back to like 15* at 4500rpm 18psi to be safe and then I could add 5* towards redline... Example 15* at 4k...17* at 5k...19* at 6k...20* at 7k.... Now that was the way I thought you explained it and if it's wrong discard what I said and please explain to me.... So that's why I said that doing it that way wasn't safe cause he would be running 20* at 18psi
In my proposed table I figured to be even on the safer side I'd only go up another 2-3* toward redline (Rather than having it stay the same like it is on my current table). I also kept Brain's recommendation about having less cruising cells and more boosted ones....Is this table right or optimal, I have no idea. I was just trying to come up with a table that was similar to what I have now that might be a little better without causing issues. I figure it might be a few weeks till I could do it properly on the dyno...maybe I should just leave it alone for now
Hustler and everyone else, could you post up your tables? I'd like to look at them for comparison and so I can see more of the logic that went into making them
#53
Tour de Franzia
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
Thats how I understood it as well.
In my proposed table I figured to be even on the safer side I'd only go up another 2-3* toward redline (Rather than having it stay the same like it is on my current table). I also kept Brain's recommendation about having less cruising cells and more boosted ones....Is this table right or optimal, I have no idea. I was just trying to come up with a table that was similar to what I have now that might be a little better without causing issues. I figure it might be a few weeks till I could do it properly on the dyno...maybe I should just leave it alone for now
Hustler and everyone else, could you post up your tables? I'd like to look at them for comparison and so I can see more of the logic that went into making them
In my proposed table I figured to be even on the safer side I'd only go up another 2-3* toward redline (Rather than having it stay the same like it is on my current table). I also kept Brain's recommendation about having less cruising cells and more boosted ones....Is this table right or optimal, I have no idea. I was just trying to come up with a table that was similar to what I have now that might be a little better without causing issues. I figure it might be a few weeks till I could do it properly on the dyno...maybe I should just leave it alone for now
Hustler and everyone else, could you post up your tables? I'd like to look at them for comparison and so I can see more of the logic that went into making them
The spark advance concept is very simple:
Load up the steady-state dyno at a given wheel speed/engine RPM
open the spark table
pick a cell you want to adjust and apply the throttle so you hit that cell (it should be highlighted by megatune to indicate that you're on that cell)
look at the dyno and see how much output you're making there
add 2* advance and burn
apply throttle to hit the same load cell and see if output increased
keep doing this until you get no more increase in power (welcome to MBT), or hear detonation
back off 2* or so for safety, more if you want more headroom, like me.
#57
Tour de Franzia
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
I really want to work on advancing spark in the vacuum cells but not really sure how to do it properly.
#58
Elite Member
Thread Starter
iTrader: (11)
Join Date: Jun 2007
Location: Meriden, CT
Posts: 2,065
Total Cats: 1
Well I just got back from a crash course in learning how important timing is! Maybe I'm just plain stupid or maybe I just have some brass ***** . I've been putsing with my cops for the past few days and today I just decided to give up for now since I can't for the life of me get the car to start and idle smoothly when they are cold (Hot its perfect). I decided to change my plugs, throw in my stock coil and give data logging a try / mess with the polski det cans. Anyways, half way through my ride I though, **** it, I have a pretty good idea on what the motor should sound like on a "safe" tune, why dont I just plug in the values from 's table (even though I know I could be playing with fire) and see how it goes. I mean whats the worst that could happen, I could have to build my motor and call AAA. DAMN! like night and ******* day. Seriously, it feels like a completely different car. It builds boost much faster, idles / cruises seamlessly, coolant temps dropped by 35*, and my butt dyno definitly picked up on some extra power. Now dont get me wrong, I didn't just load the table and rip ****....I went to a few very rural straights and eased into the throttle a few times keeping an eagle eye on my wb and listening as hard as I could with the det cans (remembering what the motor sounded like with the original table loaded). After a few passes I slowly worked my way up to some full boost runs and I've been grinning ever since. The car still runs rich and I know the tune could probably still use ALOT of work, but its much better than what I originally had. I feel like I'm babbling now, so I'll shut up....I'm just so damn excited!
Lets hope that this post isn't followed by a, "I think my motor is blown" thread, cross your fingers for me
Lets hope that this post isn't followed by a, "I think my motor is blown" thread, cross your fingers for me
#60
Elite Member
Thread Starter
iTrader: (11)
Join Date: Jun 2007
Location: Meriden, CT
Posts: 2,065
Total Cats: 1
Just did, I took out one of my wastegate springs, so I should be at like 12psi now. I'ma see how I like it and might just run it like that for now. I'd much rather have peace of mind than to push things. What I should do is hook up my tru boost solenoid so I can change my boost on the fly should the need arise, lol.