Hi I have searced to find one post about building a diypnp you self. I did not find one but if there is one please point me that way.

Ok so I got it. I have read the instructions
http://www.diyautotune.com/diypnp/do..._assembly.html

And the stuff specific to my miata

http://www.diyautotune.com/diypnp/ap...3-16b6-mt.html

So here are my questions. is there a complete list of the relay/ diode/etc that a miata needs installed. The info seems spread out everywhere and I dont get it.

How do i bend the diode/map sensor/ other stuff with metal ends so they fit in the board right and dont break as I bend them. Do you just use pliers?

 

for the MAP sensor and FETs, use needle-nose pliers, grab them all and bend. For everythign else, use your fingers.

I assume you've seen this:

http://www.miataforumz.com/showthread.php?t=356


do you have a/c? if so I suggest gslender's firmware.

 

Brain that is exactly what I was looking for. Thank you so much. I mean really that is going to save me so much stress and I dont feel near as lost or confused after reading that. You the man!!!!!!!

Now I need to find how to install the vtps/ how to hook up aem wide band o2/ boost control & a/c yes I have it and I guess need the gslender firmware. I will search to find it. I assume its on here somewhere.