GammaE
Thread Starter
Junior Member
Joined: Jan 2008
Posts: 74
Total Cats: -4
From: Toronto, Ontario, Canada
GammaE
The megamanual defines it as:
When I'm fully warmed up & idling the Gamma Enrichment gauge (in TunerStudio) reads 140-150%. How can I tell what system is causing the enrichment? eg: the acceleration/deceleration, barometric, and manifold air temperature sensor?
How do I turn them all off for tuning?
GammaE
Gamma is the total enrichment factor, computed by MegaSquirt® taking into account all of warmup, acceleration/deceleration, barometric, and manifold air temperature sensor correction factors, but excluding EGO correction, which is handled separately (See Corrections/Enrichments, below.) Returned from MS as a percentage value in "gammae."
Gamma is the total enrichment factor, computed by MegaSquirt® taking into account all of warmup, acceleration/deceleration, barometric, and manifold air temperature sensor correction factors, but excluding EGO correction, which is handled separately (See Corrections/Enrichments, below.) Returned from MS as a percentage value in "gammae."
How do I turn them all off for tuning?
Reply
0
0
1) you can right click on a gauge and swap it out for another, focusing on the several 'gamma' gauges, see if it's any of them..
2) Run a datalog to and then open it up in notepad and see if any of the logged fields indicate the issue.
-tomaj
2) Run a datalog to and then open it up in notepad and see if any of the logged fields indicate the issue.
-tomaj
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
usd2bfst
Hydra
2
May 11, 2015 12:32 PM
