MS1 on my 95
#1
MS1 on my 95
So I recently bought an MS1 that was pulled from a 94-95 car that the previous owner says was around 200 hp. I already have a wide band and what I think is a decent understanding of the ECU. I haven't physically received the unit as of now but I will by the end of today or tomorrow, so I can't see what mods it has done to it. I will be going into a bone stock 95, I'm planning on deleting my A/C because it doesn't work anyway and my cruise control is deleted as well. I've found some MS1 basemaps for a stock 94-95 car and I've also found some halfway decent ecu pinouts. Like I said I have a wide band and also bought a harness to wire into the factory harness, I'm not really afraid of soldering iron either. I just want to know if there is anything else that I'm missing. I plan on mapping out the stock harness and labeling all the wires. Then wiring in the basics, Removing my fuel pump fuel fuse to check base timing. Is there anything that will help me or anything that I'm missing? Thanks!
Thread
Thread Starter
Forum
Replies
Last Post