00/99 IAC into 92 wiring harness
#1
00/99 IAC into 92 wiring harness
Hey guys, I am having idling issues at cold start. After letting it run for about a couple minutes it will idle fine. I was wondering if I should use the NB iac? Are there any settings that I need to change? Anyone having problems with an NB Iac?
Currently, I have a custom intake manifold with a skunk 2 throttle body installed. I am using the oem TPS from a 2000 NB and IAC installed but not plugged in from a 2000 NB. I have the harness from a 2000 NB ready to tap into my 92 harness.
[Information]
1992 chassis
1999 NB 1.8 engine - turbo
Custom Intake Manifold w/ skunk 2 TB & IAC
MSpnpV2
Timing was verified - no problems.
Currently, I have a custom intake manifold with a skunk 2 throttle body installed. I am using the oem TPS from a 2000 NB and IAC installed but not plugged in from a 2000 NB. I have the harness from a 2000 NB ready to tap into my 92 harness.
[Information]
1992 chassis
1999 NB 1.8 engine - turbo
Custom Intake Manifold w/ skunk 2 TB & IAC
MSpnpV2
Timing was verified - no problems.
Last edited by AdoboMiata; 09-21-2015 at 01:04 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM