Closed loop idle on DIYPNP for 99-00
#1
Elite Member
Thread Starter
Join Date: Mar 2006
Location: Schwarzenberg, Germany
Posts: 1,554
Total Cats: 101
Closed loop idle on DIYPNP for 99-00
Hi,
I just downloaded the new "base-MSQ" for the 99-00 DIYPNP and I have seen, that there is the MS2 Closed loop idle activated. Ben also mentioned that DIY had quite a success with this.
I noticed, that the target RPM seem a little high to me. Is this intention?
I would like to discuss this and the people that are running the cl idle to post their experiences.
Greets and thanks
I just downloaded the new "base-MSQ" for the 99-00 DIYPNP and I have seen, that there is the MS2 Closed loop idle activated. Ben also mentioned that DIY had quite a success with this.
I noticed, that the target RPM seem a little high to me. Is this intention?
I would like to discuss this and the people that are running the cl idle to post their experiences.
Greets and thanks
#5
Elite Member
Thread Starter
Join Date: Mar 2006
Location: Schwarzenberg, Germany
Posts: 1,554
Total Cats: 101
Car is up and running - idle is quite well, but:
- the car starts and the engine revs up to like 3000 rpm. After 3-5 seconds it goes done to ~1200 rpm and idles quite well. If I start the car more often (as you do, when you set up things) the idle goes even higher for 3-5 seconds after startup. (had ~4.000 rpm)
Any thing I should change?
Thanks, Greets
Sven
- the car starts and the engine revs up to like 3000 rpm. After 3-5 seconds it goes done to ~1200 rpm and idles quite well. If I start the car more often (as you do, when you set up things) the idle goes even higher for 3-5 seconds after startup. (had ~4.000 rpm)
Any thing I should change?
Thanks, Greets
Sven
#8
Car is up and running - idle is quite well, but:
- the car starts and the engine revs up to like 3000 rpm. After 3-5 seconds it goes done to ~1200 rpm and idles quite well. If I start the car more often (as you do, when you set up things) the idle goes even higher for 3-5 seconds after startup. (had ~4.000 rpm)
Any thing I should change?
Thanks, Greets
Sven
- the car starts and the engine revs up to like 3000 rpm. After 3-5 seconds it goes done to ~1200 rpm and idles quite well. If I start the car more often (as you do, when you set up things) the idle goes even higher for 3-5 seconds after startup. (had ~4.000 rpm)
Any thing I should change?
Thanks, Greets
Sven
Ken
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
Mikel
MEGAsquirt
4
09-28-2015 04:46 PM