Hey guys, I tried to post here: https://www.miataturbo.net/forum/showthread.php?t=3077 but it wouldn't let me. I dunno if I'm too much of a noob or if someone's banstick needs to be recharged or what.

I was hoping one of you kind soles could supply me with a map, or point me toward a download somewhere, so I could at least get the car on the road for some additional tuning. Setup is a BEGI S3 w/ GT2560 on a '96 motor and 550 injectors. I'm planning to run 12 pounds but anything I can use as a jumping off point would be excellent. If anyone can help me out I will be eternally grateful.

 

The MSPNP base map is as good of a place to start as any.

 

The only maps from MS that I've been able to find are NA maps. Either I'm looking the wrong place, or I'm just completely missing the concept. Running a NA map on a car running 12psi just doesn't seem like a good starting point to me. Won't I be slinging pistons and rods all over the road WAYYY before I get it anywhere close to dialed in?

Sorry for my ignorance, this will be my first attempt at tuning a standalone. I've tweeked on piggybacks before, but they always had some sort of decent tune before I started.

 

DIY's MS base maps are scaled for boost. Don't know what you're looking at.

 

While I don't agree with starting with someone else's maps over what DIY provides I'll post mine anyway.

standalone MSI in a 94 with gt2560r on a 99 motor with 550s. Don't just run my MSQ because I run COPs so your dwell times will be off.

USE AT YOUR OWN RISK!!!

 

Thanks for posting the map, I'll go through it and see if I can pick apart the variances from the MS base map before I run anything. I appreciate the help and I'll be careful