Car quit starting
#1
Senior Member
Thread Starter
iTrader: (2)
Join Date: Jun 2012
Location: Texas
Posts: 1,153
Total Cats: 50
Car quit starting
So I did a coolant reroute this weekend and before I did it the car was running good. I had to remove the cas and but other than that nothing changed. I am getting fuel rpm and ignition signals in tunerstudio. I have tried other tunes and was able to get the car to start one time on diys base map however as soon as I burned the car shut off and wouldnt start even if I load other tunes and come back to the base. I am out of ideas. Could my cas have craped out on me?
Update.
Got the car started. Seems that some crazyness electrical issue is taking place. I pulled 1 cop and tested for spark and saw none. I then tested #2 on harness with same coil and got spark. I then put the same coil back on one and tested again just to be sure and I got spark. I tested all the other coils and got spark. I then put everything back in and car started up. I turned of the car and started it a couple times just to be sure. I don't know what kind of issue I have. Maybe the harness. At this point I think this thread needs to be moved cause it doesn't seem to be primarily ms driven.
Update.
Got the car started. Seems that some crazyness electrical issue is taking place. I pulled 1 cop and tested for spark and saw none. I then tested #2 on harness with same coil and got spark. I then put the same coil back on one and tested again just to be sure and I got spark. I tested all the other coils and got spark. I then put everything back in and car started up. I turned of the car and started it a couple times just to be sure. I don't know what kind of issue I have. Maybe the harness. At this point I think this thread needs to be moved cause it doesn't seem to be primarily ms driven.
Last edited by ScottyP3821; 08-25-2013 at 02:58 AM.
#4
I'm a terrible person
iTrader: (19)
Join Date: Apr 2009
Location: Arizona
Posts: 7,174
Total Cats: 180
I second unplugged or poorly plugged in connections. Check your grounds and everything else in the area too. And by check I mean physically push in every connector, even ones you didn't unplug.
Thread
Thread Starter
Forum
Replies
Last Post
elesjuan
Build Threads
9
11-14-2018 12:18 PM