I just noticed today, and I've been running this forever. First to figure it out gets nothing. Only reason I noticed is cause I'm making a new map w/ boost cells.

 

Its not in PSI. Welcome to MS2...

 

True, but your not seeing the forest so to speak...

 

Please, show me the trees.

 

the 94%?

 

Nope, you're looking at the trees.

 

Nvm, my eyes werent focussed

 

I notice that it's 16x16, and mine reads in 12x12... is that a function of MS2?
I also see that my "rows" are read in kPa, and you have a "%" sign.

 

We have a winner. Since when does MS2 have 16x16 tables? It only has that size for ve. Spark, AFR, etc are all 12x12. I read up on MS2 and all I read about is 12x12 tables. I drew up a ve table based on other's people's and then I went to type it into megatune and that's when I realized there were more boxes. So now my new table goes from 20-110 kPa in 10 kPa increments, then 20kPa increments from there to 230kPa and RPM from 500 to 8000 in 500 RPM increments.

 

Since build 2.0 of the MS2Extra code. It is selectable in Megatune under "Basic Setup" -> "General, lags" as follows:



Do I win nothing as well?

 

Ah, yeap, I see that now. Had no idea it was a 16x16 table till I drew up a fancy 12x12 and started putting in the numbers to find I had more boxes then numbers. Sorry, but I already gave nothing to samnavy, so you'll have to ask him if he wants to share it with you.

And damnitboy MLV is a gift from the gods. And acceleration enrichments are a pain to get right. Noise is killing me. Joe, I'm going to post a screenshot in a second for you to look at. I get random voltage spikes recorded in datalogs. No idea why, but it causes problems.

EDIT: here's a pic. This one shows it droping to minimum of 9.7 volts. It also spiked once to 22.2 volts! That can't be good. And note all the noise in the coolant sensor reading. All other sensors read smoothly. pulse width and A/F ratio's are weird sometimes, but that's accel. enrichments kicking in. Working on those.