Post your TPS-based acceleration enrichments.
#7
Yes, this is one area of tuning that I am still in the dark about, even after reading the manual. If someone could break it down for me on what exactly to change and what each thing does, it would be greatly appreciated. I used the 94/95 PNP settings on my 97, they worked pretty well, only when is the engine cold where the engine hesitates a tad when I hit the throttle, but once warm, everything is great.
#11
deja frigging vous guys
Do these settings affect how the sweep of the potentiomemtr shows up on the small vertical gage on the AE wizard screen ????
The VTPS is installed and I can see it move mechanically.
I go to the calibration screen and acquire the values with the throttle open and closed etc. Also swap one of the dashboard gages and it shows the full sweep of the potentiometer but when I go to the AE wizard screen the little vertical gage only shows part movement as does the logs ( ? )
Do these settings affect how the sweep of the potentiomemtr shows up on the small vertical gage on the AE wizard screen ????
The VTPS is installed and I can see it move mechanically.
I go to the calibration screen and acquire the values with the throttle open and closed etc. Also swap one of the dashboard gages and it shows the full sweep of the potentiometer but when I go to the AE wizard screen the little vertical gage only shows part movement as does the logs ( ? )