Roll Call
#2
MSI V3.0 DIYautotune Mods MSnSE 029v/w
Fuel/Spark Idle will be soon. Parallel install for A/C and Alternator.
Stock 240 cc injectors, soon to be 550cc RX-7 injectors.
T25 Turbo at 7psi, with plan to max the efficiency of this turbo out.
'99 1.8 with oversized wiseco and pauters.
Fuel/Spark Idle will be soon. Parallel install for A/C and Alternator.
Stock 240 cc injectors, soon to be 550cc RX-7 injectors.
T25 Turbo at 7psi, with plan to max the efficiency of this turbo out.
'99 1.8 with oversized wiseco and pauters.
Last edited by cjernigan; 04-10-2007 at 02:27 AM.
#3
Elite Member
iTrader: (5)
Join Date: Jul 2006
Location: Central California
Posts: 2,544
Total Cats: 4
MS1 V3.0 DIYautotune Mods
Controlling Fuel, Ignition and Idle. Stock ECU is on the shelf and 550 RX7 injectors are in. Currently at 7-8psi (max wastegate boost) and will be working up to around 12 with the GM boost solenoid soon.
Car is a 1990 1.6 w/ carillo rods freshly rebuilt with a Bell gt2554 turbo system.
edit: Thanks for sticking around and being a helpful member Al
Controlling Fuel, Ignition and Idle. Stock ECU is on the shelf and 550 RX7 injectors are in. Currently at 7-8psi (max wastegate boost) and will be working up to around 12 with the GM boost solenoid soon.
Car is a 1990 1.6 w/ carillo rods freshly rebuilt with a Bell gt2554 turbo system.
edit: Thanks for sticking around and being a helpful member Al
#8
Supporting Vendor
iTrader: (5)
Join Date: Jun 2006
Location: Duluth, GA 30097
Posts: 803
Total Cats: 0
MS1 PCBv3 w/ MSnS-E 029v on an otherwise bone stock '91
Wait.. what's this? Is that a Greddy dealer acceptance email in my inbox? Hmm... I bet I can get a turbo kit for this thing pretty soon now...
Wait.. what's this? Is that a Greddy dealer acceptance email in my inbox? Hmm... I bet I can get a turbo kit for this thing pretty soon now...
__________________
Jerry a.k.a. 'FoundSoul'
DIYAutoTune.com
'91 Miata BEGi S3 GT2560 w/ MSPNP - 14.1psi - 253whp, 232wtq
'95 Miata n/a
A few other cars....
Jerry a.k.a. 'FoundSoul'
DIYAutoTune.com
'91 Miata BEGi S3 GT2560 w/ MSPNP - 14.1psi - 253whp, 232wtq
'95 Miata n/a
A few other cars....
#13
Elite Member
iTrader: (10)
Join Date: Jun 2006
Location: Athens, Greece
Posts: 5,978
Total Cats: 356
MS1 cpu, V3 board, MSnSE 029v code
2002 1.8 N/A engine, fuel and spark (idle control currently left to the stock ECU)
Running with TPSdot, +12hp with a MonsterFlow filter (137bhp stock, 149bhp now).
Extras: Switchable tables, realtime baro correction, launch control.
Jim
2002 1.8 N/A engine, fuel and spark (idle control currently left to the stock ECU)
Running with TPSdot, +12hp with a MonsterFlow filter (137bhp stock, 149bhp now).
Extras: Switchable tables, realtime baro correction, launch control.
Jim
#17
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,499
Total Cats: 4,080
sent my money today! ill be hanging out with you cool guys now.
just be controlling my 305cc injectors for now untill i source something better, but will be running the snot out of the current setup.
just be controlling my 305cc injectors for now untill i source something better, but will be running the snot out of the current setup.