TS VEAL for warmup enrichment
#1
TS VEAL for warmup enrichment
I think many of you here will like to try the latest alpha/beta? release of Tunerstudio which finally has a WUE analyzer. Check it out: TunerStudioMS Download
#7
Elite Member
iTrader: (1)
Join Date: Jun 2006
Location: Warrington/Birmingham
Posts: 2,642
Total Cats: 42
You sit there and watch the laptop adjust the curve to hit your AFR target, OR you sit there and move the curve yourself so you hit your AFR target. And once it's done, that's it you never touch it again, unlike with VEAL where you can spend days playing around with it if you really like to mess with your tune.
I really wish Phil had spend the time creating a deadtime analyser or something.
#8
Cpt. Slow
iTrader: (25)
Join Date: Oct 2005
Location: Oregon City, OR
Posts: 14,209
Total Cats: 1,139
I've used it, worked well, it fined tuned the WUEs more than I would of spent the time to do.
My one gripe is that i did it on a 60* day and it looks like anything colder than 60 now has the same value as 60*. So whenever it's cooler, I'll have to run it again to raise those values.
My one gripe is that i did it on a 60* day and it looks like anything colder than 60 now has the same value as 60*. So whenever it's cooler, I'll have to run it again to raise those values.
#11
Elite Member
iTrader: (1)
Join Date: Jun 2006
Location: Warrington/Birmingham
Posts: 2,642
Total Cats: 42
x 11ty billion
It's great the devs keep adding these new features, but none of them are being documented. So you have no idea how they're supposed to work.
Take the dashpot decay factor, see if you can find any documentation on that - there's none. I also note that the default value for that is now 0 too....
It's great the devs keep adding these new features, but none of them are being documented. So you have no idea how they're supposed to work.
Take the dashpot decay factor, see if you can find any documentation on that - there's none. I also note that the default value for that is now 0 too....
#12
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,501
Total Cats: 4,080
dashpot decay factor seems to be working for me...I had it set to 3 and I could watch the duty stay at 3% above the last known for a good 3 seconds slowly decaying down...now back to 1 it drops much faster. im on 1.2.1.
but like I have no freaking clue how to get WUEAL to work. I see the like AFR curve thing and I let it sit during an entire warmup and saw no suggested changes. So I was like f dat noise, ill old school this **** and just watch it warmup for 10 minutes and tune the curve by hand like a boss. ill never touch it again.
what was really annoying was when i was on b2.2.10 and the VEAL didnt work in boost...that made me sad. b2.2.11 fixed that.
but like I have no freaking clue how to get WUEAL to work. I see the like AFR curve thing and I let it sit during an entire warmup and saw no suggested changes. So I was like f dat noise, ill old school this **** and just watch it warmup for 10 minutes and tune the curve by hand like a boss. ill never touch it again.
what was really annoying was when i was on b2.2.10 and the VEAL didnt work in boost...that made me sad. b2.2.11 fixed that.
#13
Elite Member
iTrader: (1)
Join Date: Jun 2006
Location: Warrington/Birmingham
Posts: 2,642
Total Cats: 42
but like I have no freaking clue how to get WUEAL to work. I see the like AFR curve thing and I let it sit during an entire warmup and saw no suggested changes. So I was like f dat noise, ill old school this **** and just watch it warmup for 10 minutes and tune the curve by hand like a boss. ill never touch it again.
Thread
Thread Starter
Forum
Replies
Last Post
Motorsport-Electronics
ECUs and Tuning
0
09-05-2015 08:02 AM