tunerstudio (MSPro3) to MEITE (ME442)
Thread Starter
Newb
Joined: Apr 2021
Posts: 21
Total Cats: 0
From: Miami, FL
tunerstudio (MSPro3) to MEITE (ME442)
Hey everyone
Happy holidays.
I wanted to ask for a friend,
His MSpro3 got wet and no longer works, he bought a ME442 to replace the damaged MSPro3, can i use tunerstudio for those ECUs or can the tune file be converted so it worked with the ME442?
Any help is appreciated
And thank you and happy holidays.
Happy holidays.
I wanted to ask for a friend,
His MSpro3 got wet and no longer works, he bought a ME442 to replace the damaged MSPro3, can i use tunerstudio for those ECUs or can the tune file be converted so it worked with the ME442?
Any help is appreciated
And thank you and happy holidays.
Reply
0
0
Senior Member
Joined: Aug 2017
Posts: 637
Total Cats: 326
From: Norwich NY
Nope.
Since the ME has a history of shall we say, very coincidental similarities to the MS, chances are that your maps likely have the same break points, so you can likely cut and paste the blocks of numbers over, but that won;t do the 1001 other little things. and the MAP scaling is probably different. You can probably copy the timing table over.
Since the ME has a history of shall we say, very coincidental similarities to the MS, chances are that your maps likely have the same break points, so you can likely cut and paste the blocks of numbers over, but that won;t do the 1001 other little things. and the MAP scaling is probably different. You can probably copy the timing table over.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
