HELP! MS3x issues!
#1
HELP! MS3x issues!
Hi guys, I just installed a MS Labs Ms3 basic, CAN box, and innovate LC-2 in my car and **** hit the fan. The car idles fine, when the A/C is not on. With the A/C on, the car wants to die every 2ish seconds.
My AFR stays at 14.7 all the time. And it feels like I'm getting bad fuel cut at 2k+ rpms. Like the car isn't drivable at all. This is with A/C on or off. Any ideas?
My AFR stays at 14.7 all the time. And it feels like I'm getting bad fuel cut at 2k+ rpms. Like the car isn't drivable at all. This is with A/C on or off. Any ideas?
#15
I deleted the CAN devices under project properties and I got my AFR readings.....dunno. Also, I was a dumbass and tried to autotune before I got my (correct) AFR readings and that screwed up my fuel table, which was causing the drivability issues. So I copy and pasted the basemap fuel table into my current tune and everything is good. Still need to tune my start up and idle.
Thread
Thread Starter
Forum
Replies
Last Post
mmmjesse
Insert BS here
18
05-13-2016 02:04 PM
TrueChaos
Suspension, Brakes, Drivetrain
12
05-08-2016 01:34 PM