Cspence's MASSIVE Part Out - AEM Tuckin99 T25 Koni H&R Flyin Miata Tial
#83
Elite Member
Thread Starter
iTrader: (11)
Join Date: Jun 2007
Location: Meriden, CT
Posts: 2,065
Total Cats: 1
BUMP!
Some one come pick up the hood and doors...they're taking up space in my dinky basement....
FREE!!!!!
BO on the remaining stuff, lets go guys
(Please no low balling...I know what my stuff is worth, I'm simply willing to work with people to sell the leftover parts)
--------------------------------------------------------------------------------------------------------
1.8L Tranny (Grinds a little on 1 - 2 shifts if driving spiritedly, otherwise its fine) $250
Wheel Spacers (Motorsport Tech) 30mm - 2.8#s and 19mm - 2.05#s with the adapter nuts (Includes custom install tool and acorn nuts)$250
Hood (Stock aluminum polished with Z34 Vent and molded barn doors, not astetically perfect) $200
Guage Panel (Custom Cspence Special ) $40 or $75 including the center console to dash trim piece
Stock Guage Cluster $30
Center Console $30
Triangle Windows FREE WITH DOORS
Drop in Windows $FREE WITH DOORS
Gutted Doors (Easy way to drop some weight, still have mounting spots for speakers) $FREE
Door Panels $COME WITH DOORS FOR FREE
Radiator w/ fan(Custom Aluminum) 24"x19"x3" $150
1.6L Ignition Coil $50
Ignitor $20
Plug Wires $20
Smoked Stock Tail Lights $50
Rear Finishing panel (No cracks) $40
Flyin Miata Clutch Override Switch Free to someone that comes (in person) and buys something
Some one come pick up the hood and doors...they're taking up space in my dinky basement....
FREE!!!!!
BO on the remaining stuff, lets go guys
(Please no low balling...I know what my stuff is worth, I'm simply willing to work with people to sell the leftover parts)
--------------------------------------------------------------------------------------------------------
1.8L Tranny (Grinds a little on 1 - 2 shifts if driving spiritedly, otherwise its fine) $250
Wheel Spacers (Motorsport Tech) 30mm - 2.8#s and 19mm - 2.05#s with the adapter nuts (Includes custom install tool and acorn nuts)$250
Hood (Stock aluminum polished with Z34 Vent and molded barn doors, not astetically perfect) $200
Guage Panel (Custom Cspence Special ) $40 or $75 including the center console to dash trim piece
Stock Guage Cluster $30
Center Console $30
Triangle Windows FREE WITH DOORS
Drop in Windows $FREE WITH DOORS
Gutted Doors (Easy way to drop some weight, still have mounting spots for speakers) $FREE
Door Panels $COME WITH DOORS FOR FREE
Radiator w/ fan(Custom Aluminum) 24"x19"x3" $150
1.6L Ignition Coil $50
Ignitor $20
Plug Wires $20
Smoked Stock Tail Lights $50
Rear Finishing panel (No cracks) $40
Flyin Miata Clutch Override Switch Free to someone that comes (in person) and buys something
#87
Elite Member
Thread Starter
iTrader: (11)
Join Date: Jun 2007
Location: Meriden, CT
Posts: 2,065
Total Cats: 1
This stuff is taking up space in my teeny garage.... help me make some room!
This is all thats left folks, get it while it lasts!
97' 1.8L Tranny (Grinds a little on 1 - 2 shifts if driving spiritedly, otherwise its fine) was $250 now $100 COME AND GET IT!!
Wheel Spacers (Motorsport Tech) 30mm - 2.8#s and 19mm - 2.05#s with the adapter nuts (Includes custom install tool and acorn nuts)was $250 now $200
Hood (Stock aluminum polished with Z34 Vent and molded barn doors, not astetically perfect) was $200 now FREE to the first person at my house
Guage Panel (Custom Cspence Special ) $40 or $75 including the center console to dash trim piece
Stock Guage Cluster THROWN OUT
Center Console was $30 now FREE
Triangle Windows FREE WITH DOORS
Drop in Windows TOSSED
Gutted Doors (Easy way to drop some weight, still have mounting spots for speakers) $FREE
Door Panels $COME WITH DOORS FOR FREE
Radiator w/ fan(Custom Aluminum) 24"x19"x3" was $150 now $100
Stock Rear Sway Bar was s Free, SCRAPPED
1.8L Brake Setup, rotors, calipers, brackets, ebc red pads, stainless braided lines SOLD
1.6L Ignition Coil was $50 now $40
Ignitor $20
Plug Wires $20
Smoked Stock Tail Lights was $50 now $40
Brake Master Cylinder and Booster was $50 now $40
1.8L Drive Shaft SOLD! $50 OBO
Rear Finishing panel (No cracks) Tossed, damaged in storage
Trunk Lid $FREE - TOSSED
Flyin Miata Clutch Override Switch Free to someone that comes (in person) and buys something
This is all thats left folks, get it while it lasts!
97' 1.8L Tranny (Grinds a little on 1 - 2 shifts if driving spiritedly, otherwise its fine) was $250 now $100 COME AND GET IT!!
Wheel Spacers (Motorsport Tech) 30mm - 2.8#s and 19mm - 2.05#s with the adapter nuts (Includes custom install tool and acorn nuts)was $250 now $200
Hood (Stock aluminum polished with Z34 Vent and molded barn doors, not astetically perfect) was $200 now FREE to the first person at my house
Guage Panel (Custom Cspence Special ) $40 or $75 including the center console to dash trim piece
Stock Guage Cluster THROWN OUT
Center Console was $30 now FREE
Triangle Windows FREE WITH DOORS
Drop in Windows TOSSED
Gutted Doors (Easy way to drop some weight, still have mounting spots for speakers) $FREE
Door Panels $COME WITH DOORS FOR FREE
Radiator w/ fan(Custom Aluminum) 24"x19"x3" was $150 now $100
Stock Rear Sway Bar was s Free, SCRAPPED
1.8L Brake Setup, rotors, calipers, brackets, ebc red pads, stainless braided lines SOLD
1.6L Ignition Coil was $50 now $40
Ignitor $20
Plug Wires $20
Smoked Stock Tail Lights was $50 now $40
Brake Master Cylinder and Booster was $50 now $40
1.8L Drive Shaft SOLD! $50 OBO
Rear Finishing panel (No cracks) Tossed, damaged in storage
Trunk Lid $FREE - TOSSED
Flyin Miata Clutch Override Switch Free to someone that comes (in person) and buys something
Thread
Thread Starter
Forum
Replies
Last Post
SuperSneakySecretSquirrel
Meet and Greet
5
09-06-2015 08:30 PM