Freshly Installed Greddy Turbo
#1
Freshly Installed Greddy Turbo
I have just completed the Greddy install on my 92 Miata. I set the Idle at 850 rpm and adjusted the timing to 6 degrees.
Anyone running 100 octane and what is the timing for 100 octane?
This will be the first of many posts as I will be moding the car even further
Anyone running 100 octane and what is the timing for 100 octane?
This will be the first of many posts as I will be moding the car even further
#3
There are other factors to consider just besides the octane level of the gas. Ambient temperature, quality of the gas, condition of the engine. You can probably go past 6*, but I wouldn't take it too far and I'd do it only a little bit at a time.. Make sure you listen for knock very closely.
#5
Thanks for info
Thanks for the information. I am in Vegas and it runs great now as it is on pump gas. I run it at autoz events and not much normal day to day driving. I will be installing an intercooler in the next couple of weeks.
Next question, how to mod the greddy to run more boost? and any one running a BOV and install info on that please.
Next question, how to mod the greddy to run more boost? and any one running a BOV and install info on that please.
Thread
Thread Starter
Forum
Replies
Last Post