Upgrade time - Flex to Mono; is it worth while?
#1
Junior Member
Thread Starter
iTrader: (3)
Join Date: Jul 2008
Location: Fresno CA
Posts: 137
Total Cats: 3
Upgrade time - Flex to Mono; is it worth while?
Like the title says, I have found a great deal on a new set of Mono Flex's. My TT Flex's have served me well. I was thinking of sending them to Tein for re-valve/upgrade but I wanted to gather some subjective info from those of you have had used both to advise if it's a better option to rebuild or upgrade to the Mono's.
Please don't clutter up the thread with xida this of fatcat that. Unfortunately I can't get these systems for the deal I'm getting the Mono's.
TIA
BTW, Mods feel free to move this to suspension if you feel the need. I placed into race prep because that's the info I'm looking for, not how nice it rides.
Please don't clutter up the thread with xida this of fatcat that. Unfortunately I can't get these systems for the deal I'm getting the Mono's.
TIA
BTW, Mods feel free to move this to suspension if you feel the need. I placed into race prep because that's the info I'm looking for, not how nice it rides.
#9
Elite Member
iTrader: (2)
Join Date: May 2008
Location: Portland, Oregon
Posts: 3,468
Total Cats: 365
I did not have them revalved. 9/6 is within the range of the stock valving. I run them close to or at full soft for street use; at my autocross track I run them close to full soft. For dry track I've been about halfway on the adjusters. I've been happy with street ride and track performance.
I can't really give a comparative review since I have no direct experience with other coilovers. Last driving season I wasn't able to get the most out of this suspension due to my hardened RS2's - .6g was the best I could do.
Edit: I went straight from 115k stock suspension to 9/6; never used the 7's.
I went with Flex for several reasons - I was able to source them locally from a shop that had experience both with Tein and with Miatas; the EDFC option was very appealing since I had very little garage time at the time (it's still awesome); and Xidas/Afcos etc were not options at the time.
So I don't know what to recommend. If you have a smoking deal on the Mono's, and don't plan on upgrading to Xidas or comparable level dampers down the road, then go for it. There was a post from someone in WTB for Tein's in the past week, so you should be able to unload your existing dampers pretty quickly.
I can't really give a comparative review since I have no direct experience with other coilovers. Last driving season I wasn't able to get the most out of this suspension due to my hardened RS2's - .6g was the best I could do.
Edit: I went straight from 115k stock suspension to 9/6; never used the 7's.
I went with Flex for several reasons - I was able to source them locally from a shop that had experience both with Tein and with Miatas; the EDFC option was very appealing since I had very little garage time at the time (it's still awesome); and Xidas/Afcos etc were not options at the time.
So I don't know what to recommend. If you have a smoking deal on the Mono's, and don't plan on upgrading to Xidas or comparable level dampers down the road, then go for it. There was a post from someone in WTB for Tein's in the past week, so you should be able to unload your existing dampers pretty quickly.
#10
Junior Member
Thread Starter
iTrader: (3)
Join Date: Jul 2008
Location: Fresno CA
Posts: 137
Total Cats: 3
Mobius, I've been pretty happy with the TT Flex. I've had them for a 29000 miles and they are still fine but the deal I have for the Mono is tempting. FWIW, I have had to learn to drive with the TT Flex, i.e. quick transitions or turns where the pavement isn't smooth causes a bit of what feels like hop in the rear (BW @ Cotton Corners or T6 @ LS). Its like the damper has a micro void on rebound and the spring releases its energy with minimal control by the damper until it catches up. Sounds weird, I know but that's the only way I can explain it. I've "learned" to drive it this way by quick counter steer inputs usually when the suspension unloads. It's not like oversteer or even snap oversteer but it does require a bit of steering correction to maintain a clean line. Ive gotten so used to it that its second nature. However if I didn't have to make these adjustments mid corner, I should be able to get on power a bit sooner. So if the Monos are a bit quicker in dealing with high speed rebound damping and are the same or better than the TT Flex in low speed and compression damping then it will be worth my while to switch. If not, then I'll send in my TT Flex's and have them freshen and "upgrade" them with a bit more high speed rebound damping leaving the low speed as is. compression damping feels perfect to me.
#12
Tour de Franzia
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
There are too many driver variables to talk about lap times.
#14
FWIW, I have had to learn to drive with the TT Flex, i.e. quick transitions or turns where the pavement isn't smooth causes a bit of what feels like hop in the rear (BW @ Cotton Corners or T6 @ LS). Its like the damper has a micro void on rebound and the spring releases its energy with minimal control by the damper until it catches up. ...So if the Monos are a bit quicker in dealing with high speed rebound damping ..
Hysteresis is where the shock shaft changes direction but the force doesn't... it lags. You can see this in the full hysteresis F-V loop of a shock, as the "fatness" of the trace, about the origin of the plot.
#15
Junior Member
Thread Starter
iTrader: (3)
Join Date: Jul 2008
Location: Fresno CA
Posts: 137
Total Cats: 3
What you are describing is not a problem with the high speed damping, but hysteresis. Yes monotubes are better than twin-tubes in this regard, although Flexes have low hysteresis compared to other twin-tubes, if they have some gas pressure.
Hysteresis is where the shock shaft changes direction but the force doesn't... it lags. You can see this in the full hysteresis F-V loop of a shock, as the "fatness" of the trace, about the origin of the plot.
Hysteresis is where the shock shaft changes direction but the force doesn't... it lags. You can see this in the full hysteresis F-V loop of a shock, as the "fatness" of the trace, about the origin of the plot.
The guy that was going to pick up my TT Flex's may not have the $$$$ to do it, so I'll likely do the revalve.
#16
Former Vendor
iTrader: (31)
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,100
It's a lot of fun to watch you consistently make a fool of yourself by posting worthless garbage like this, but I would encourage you at some point to take a ride or drive a car that's on Xidas so you can understand why we all rave about them so much.
Your trolling is forgivable because you literally cannot fathom how good they are until you try them.
Your trolling is forgivable because you literally cannot fathom how good they are until you try them.
#18
It's a lot of fun to watch you consistently make a fool of yourself by posting worthless garbage like this, but I would encourage you at some point to take a ride or drive a car that's on Xidas so you can understand why we all rave about them so much.
Your trolling is forgivable because you literally cannot fathom how good they are until you try them.
Your trolling is forgivable because you literally cannot fathom how good they are until you try them.
I openly admit that I haven't tried em, and have said on numerous occasions that I'm more than open to the experience.
You two post "xida or death" in just about every suspension related thread, many completely unrelated, so I returned the favor.
I still <3 u both though
Maybe someday soon I'll swing by SLO and have you show me in person.
Last edited by 18psi; 01-04-2013 at 08:56 AM.
#19
It's a lot of fun to watch you consistently make a fool of yourself by posting worthless garbage like this, but I would encourage you at some point to take a ride or drive a car that's on Xidas so you can understand why we all rave about them so much.
Your trolling is forgivable because you literally cannot fathom how good they are until you try them.
Your trolling is forgivable because you literally cannot fathom how good they are until you try them.
#20
I'm sure this has been answered elsewhere, but let's pretend I'm on Tein Flex's right now. Let's also pretend I'm a pretty fast driver and am getting my car close to its performance potential. What sort of gain would I see by moving to Xidas? I don't really care about ride comfort, it's a track car.
For argument's sake, let's say I run 1:59s at TWS on NT01s. Am I running 1:58s with the Xidas? 1:57s? Or is there a better way to benchmark it?
I guess I'm trying to determine what the best way to spend the money is if my ultimate goal is lower lap times.
robert
P.S. Sorry to threadjack.
For argument's sake, let's say I run 1:59s at TWS on NT01s. Am I running 1:58s with the Xidas? 1:57s? Or is there a better way to benchmark it?
I guess I'm trying to determine what the best way to spend the money is if my ultimate goal is lower lap times.
robert
P.S. Sorry to threadjack.