Originally Posted by ryansmoneypit
(Post 1401630)
so whats the difference with the ABS vs non abs hubs? From my local dealership, the non abs are $30 more expensive. $130.00 each yikes!
|
Originally Posted by ITOzann
(Post 1402286)
Also, I recall back tracing oem hubs and cross referenced them to NTN at some point. Haven't seen failure on those up to date.
|
I broke 2 OEM rears.
|
le sigh
There are four different shops working on front hubs, some of which are public and/or released already. No high strength direct replacement rears for 4x100 and OEM halfshafts in the works that I know of.
At least one of which remains private for now. Of the ones I have seen, I think there is still some work to do. On one hand, it's great that the platform is popular enough and has a customer base willing to spend the needed dollars to embiggen the performance envelope. I'm adopting a wait and see on front hub designs. OTOH, I dread having to throw my hat into the ring if the current crop does not bear fruit. Just looked up the etymology of that phrase, thanks Ted. Miixed metaphors FTW. Anyway, it would be a big, expensive project. But as of today, there is still no cost effective solution to resist the now common 1.3 on street legal tires and 1.7g from Hoosiers. Add to those loads, the exploding (too soon?) popularity of club level endurance racing and it's a crisis point for the platform's development. |
When will your new hubs be shipping, and how much will they cost?
|
What happened to the mr2 spyder hub info I posted? Is there censorship going on that we should be aware of?
|
Mods broke MR-S hub discussion into a new thread.
|
MR-S hub discussion moved to: https://www.miataturbo.net/race-prep...cussion-94420/
|
Originally Posted by turbofan
(Post 1436829)
When will your new hubs be shipping, and how much will they cost?
|
$19 is kinda steep, will you be offering a group buy or sponsorship opportunity?
|
Ahhh - I was wondering. Thanks guys
|
Originally Posted by turbofan
(Post 1436841)
$19 is kinda steep, will you be offering a group buy or sponsorship opportunity?
|
I'm holding out until they come with free Tecnas vouchers.
|
Nice to see you turning over a new leaf, Emilio. I'll be sure to be heartbroken if you don't meet these promises.
|
Originally Posted by emilio700
(Post 1436826)
There are four different shops working on front hubs, some of which are public and/or released already. At least one of which remains private for now. Of the ones I have seen, I think there is still some work to do.
On one hand, it's great that the platform is popular enough and has a customer base willing to spend the needed dollars to embiggen the performance envelope. I'm adopting a wait and see on front hub designs. OTOH, I dread having to throw my hat into the ring if the current crop does not bear fruit. Just looked up the etymology of that phrase, thanks Ted. Miixed metaphors FTW. Anyway, it would be a big, expensive project. But as of today, there is still no cost effective solution to resist the now common 1.3 on street legal tires and 1.7g from Hoosiers. Add to those loads, the exploding (too soon?) popularity of club level endurance racing and it's a crisis point for the platform's development. |
We'll see.
|
Hubs, breaking under track use, escape liability as they are "not intended" for racing or track. Hubs built for the track lose that protection. I am sure that Emilio went down this road with the development of the 6UL Probably one of the reasons for any of the major groups not jumping on this needed component. Sufficient demand has always been there.
|
Lost another rear hub yesterday. The current hubs were installed in February 2016 and have ~150 track hours in a car that does 1.2-1.3Gs in the turns.
This time, it popped on track but I retained the wheel -- it's good to be lucky. Car isn't driveable though (engine torque spins the center of the hub, but not the wheel -- sounds awful). Pictures to come. |
Once a year, whether you think you need to or not.
|
Originally Posted by Savington
(Post 1440320)
Once a year, whether you think you need to or not.
There are new options in the works but no ETA as yet. |
All times are GMT -4. The time now is 10:31 AM. |
© 2024 MH Sub I, LLC dba Internet Brands