Konmo's set is here. Will ship on Monday because posts are closed now.

1. Philly Miata (Paid/Shipped)
2. bahurd (Paid/Shipped)
3. Colipto (Paid/Shipped)
4. konmo (Paid/shipped)
5. Farpolemiddle (Paid/shipped)
6. 99mx5 (Paid/shipped)
7. brianm97 (paid/shipped)
8. Sexyicky (paid/shipped)
9. Konmo (paid)
10. bhooligan
11. Goodwood
12. Darbymx5

 

1. Philly Miata (Paid/Shipped)
2. bahurd (Paid/Shipped)
3. Colipto (Paid/Shipped)
4. konmo (Paid/shipped)
5. Farpolemiddle (Paid/shipped)
6. 99mx5 (Paid/shipped)
7. brianm97 (paid/shipped)
8. Sexyicky (paid/shipped)
9. Konmo (paid/shipped)
10. bhooligan
11. Goodwood
12. Darbymx5

 

Received my box. Everything was very well packaged.

 

Thanks dude. I hope you will enjoy it.
I am waiting for the other 3 sets from day to day.

 

Any chance on getting a set?

 

I will let you guys know .

 

Definitely put me in line

 

I installed my gears this past weekend. Runs great! Couldn't be more satisfied! Thanks again gianic!

 

Guys I have in stock 2 sets right now. I can ship on Monday.
The prioritized guys are
10. bhooligan
11. Goodwood

 

Would like to get on the list for this as well, $$$ ready when available.

 

I will give you priority because I didnt get a response from the other guys.

 

1 ramensoop
2 bhooligan
3 Goodwood
4 Darbymx5

 

1 ramensoop (paid)
2 bhooligan
3 Goodwood
4 Darbymx5

 

Please put me in line. Do these come with the speedo gear?

 

Just the ring and pinion. you can use a yellowbox to calibrate the speedo. https://yellr.com

 

I have one set in stock . I will ship asap to the guy who will pay me first.

1 ramensoop (paid/shipped)
2 bhooligan
3 Goodwood
4 Darbymx5
5 vitamin_j

 

That doesn't work on NAs though, does it?

 

There is not an off the shelf NA 3.63 speed sensor. You can supposedly build one out of various parts, but I have never actually seen anyone do it.

 

I believe this was the parts list I used from the other Miata site a couple of years ago when I built my drive . I was able to get everything on the list through my local Mazda dealer at a reasonable price. I don't know if all the parts are still available or not. Good luck. Fredb
Speedo Parts:
M502-17-441 (20 tooth gear molded onto shaft)
1011-17-442A (aluminum sleeve that's offset for the smaller dia 20 tooth gear)
9922-20-214 (small roll pin to lock shaft and gear into sleeve)
9958-60-8166 (internal oil seal for shaft to sleeve)
1110-17-443 (o-ring to seal sleeve to transmission)

The above aluminum sleeve comes bare, so the pin, internal oil seal, and o-ring are necessary if you don't want to take them from the old speedo gear sender assembly. At minimum you should buy the internal oil seal, it's difficult to remove w/o damaging it.

 

You rock, dude! I was able to find everything except the last o-ring online for about $50. I should be able to get one locally the right size or re-use what I got.