Ground control
#1
Elite Member
Thread Starter
iTrader: (30)
Join Date: Aug 2007
Location: Va Beach
Posts: 7,329
Total Cats: 12
Ground control
With my ground control coil over kit from my NA work on an NB? That's all....
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#2
You could do some trimming on the NA hats to fit (or on the chassis). I had a set of Koni yellows and eBay collars and springs. I didn't make it past the rear, but the length of the shock looked correct and the bolts on the NA hat lined up...but the center hole on the NB was too small for the NA hat to fit through.
And, the spring perch was different enough between the two that I didn't feel comfortable putting it together.
And, the thickness of the NB hat bushings is thicker than the NA, so I couldn't get the shaft through far enough to get the nut on the threads.
It could work, but I gave up and sold them to a friend with a NA.
And, the spring perch was different enough between the two that I didn't feel comfortable putting it together.
And, the thickness of the NB hat bushings is thicker than the NA, so I couldn't get the shaft through far enough to get the nut on the threads.
It could work, but I gave up and sold them to a friend with a NA.
Last edited by Deatschwerks; 08-19-2010 at 08:58 AM.
#5
Elite Member
Thread Starter
iTrader: (30)
Join Date: Aug 2007
Location: Va Beach
Posts: 7,329
Total Cats: 12
I will probably get new Illuminas since these already have like 25k on them. So I would order NB Illuminas, I would obviously have Nb top hats and the NA GC coil overs.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM
chris101
Miata parts for sale/trade
5
02-19-2016 07:13 PM