Weird thumbing sound around 30-40mph
#1
Weird thumbing sound around 30-40mph
Hi guys, I would like to ask you to give me some suggestions because I have no idea how to proceed.
So after my engine rebuild I’ve obviously stuck my car back together and everything runs fine.
However I’ve got a very anyoning thumbing sound when I’m going 30-80kmph and it speeds up and down based on my speed and the frequency is matching with my wheel speed.
I did fitted a 2003 torsen diff and replaced the discs and pads for brembo ones, that’s about it what I did to the rear part of the power train
The sounds is definitely coming from the rear
So what I did was: I jacked the rear up and let the tires spin, but this was without the noise then I tried it with the lower suspension mounts resting on 2 jacks so the suspension would be compressed but again without the sounds, the I pressed the brake a little to load the drivetrain but still no difference.
Then I fitted 4 “new” tires to see if that would make a change but also did not do anything.
Then I checked my ppf alignment which is all fine
Then I checked the wheel bearings but they make 0 noise and have 0 play
The handbrake is adjusted properly and the wheels spin freely
And all the lugnuts are torqued to spec
Here is the sound I’m referring to:
https://drive.google.com/file/d/1tvq5-MBweH1s9Eu3AnoqfB7e_9KJGtox/view?usp=drivesdk
So after my engine rebuild I’ve obviously stuck my car back together and everything runs fine.
However I’ve got a very anyoning thumbing sound when I’m going 30-80kmph and it speeds up and down based on my speed and the frequency is matching with my wheel speed.
I did fitted a 2003 torsen diff and replaced the discs and pads for brembo ones, that’s about it what I did to the rear part of the power train
The sounds is definitely coming from the rear
So what I did was: I jacked the rear up and let the tires spin, but this was without the noise then I tried it with the lower suspension mounts resting on 2 jacks so the suspension would be compressed but again without the sounds, the I pressed the brake a little to load the drivetrain but still no difference.
Then I fitted 4 “new” tires to see if that would make a change but also did not do anything.
Then I checked my ppf alignment which is all fine
Then I checked the wheel bearings but they make 0 noise and have 0 play
The handbrake is adjusted properly and the wheels spin freely
And all the lugnuts are torqued to spec
Here is the sound I’m referring to:
https://drive.google.com/file/d/1tvq5-MBweH1s9Eu3AnoqfB7e_9KJGtox/view?usp=drivesdk
Last edited by keverlever; 04-11-2024 at 03:05 AM.
Thread
Thread Starter
Forum
Replies
Last Post
atotalpro
Suspension, Brakes, Drivetrain
17
05-30-2019 09:36 AM
420anrkey
Suspension, Brakes, Drivetrain
3
08-28-2012 06:25 AM