Gen2 11.75" Big Brake Kit @ Trackspeed - Only $599!
#64
Former Vendor
Thread Starter
iTrader: (31)
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,100
It's also worth noting that the Jongbloed, the Storm S1, and the Dial In appear to be made in the exact same factory, based on the product UPC codes and the QC markings. The 6UL appears to be made in a different factory (better packaging, different UPC/QC stickers).
#67
Former Vendor
Thread Starter
iTrader: (31)
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,100
The first of the Gen2 BBKs are leaving today. If you're waiting for Directional rotors or 6-piston calipers, expect to see your kit by the end of the month. If you're waiting for a standard straight-vane kit with Dynalites, your kit should depart here next Wednesday. Straight vane upgrade kits (kits without calipers) are in stock.
#68
Just placed an order, super excited!
I opted for the Dynapro upgrade, and was looking into buying a set of pads too, but can you confirm if the kit will ship with the Narrow DP4 (pad 7816) or the normal one (pad 7812)? I want to be sure before I pick up some pads.
Thanks!
I opted for the Dynapro upgrade, and was looking into buying a set of pads too, but can you confirm if the kit will ship with the Narrow DP4 (pad 7816) or the normal one (pad 7812)? I want to be sure before I pick up some pads.
Thanks!
Last edited by drsourmonkey; 07-10-2015 at 12:23 PM.
#70
Elite Member
iTrader: (14)
Join Date: Sep 2009
Location: Birmingham, AL
Posts: 2,101
Total Cats: 180
So when can i get my hub, spindle, ducts back with the BBK? Uh - i hope i helped some here, unless I'm special K
I'll add, as not to appear to be dissing Andrew, I'm special K - can't let the cat out of the bag, but one FAT cat is peaking out of it. Why else would he require my stuff?
I'll add, as not to appear to be dissing Andrew, I'm special K - can't let the cat out of the bag, but one FAT cat is peaking out of it. Why else would he require my stuff?
Last edited by GeneSplicer; 07-16-2015 at 09:33 AM.
#71
Senior Member
iTrader: (1)
Join Date: Dec 2010
Location: Farmington Hills, MI
Posts: 1,218
Total Cats: 175
Received this kit over the weekend! I'll hopefully be installing tomorrow. Do you have torque specs for all the bolts? I'm so excited to safety wire these!
All mounting bolts should be the same at ~40 ft-lbs, but I'm seeing numbers all over the place for similar rotor hats. I've seen values from 85 in-lbs to 195 in-lbs.
All mounting bolts should be the same at ~40 ft-lbs, but I'm seeing numbers all over the place for similar rotor hats. I've seen values from 85 in-lbs to 195 in-lbs.
Last edited by acedeuce802; 07-20-2015 at 09:06 AM.
#72
Former Vendor
Thread Starter
iTrader: (31)
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,100
The rotor bolts are SAE grade 8. I torque to 20ft.lbs. Seems like a lot, but it's a high-quality fastener.
Kits have been trickling out the door over the last week or so. Some of the Dynalite straightvane and directional kits have gone out, but not all. Everything should be shipped out by tomorrow afternoon.
Kits have been trickling out the door over the last week or so. Some of the Dynalite straightvane and directional kits have gone out, but not all. Everything should be shipped out by tomorrow afternoon.
#73
My brakes arrived on Friday (thanks Andrew) and they sure look purty.
One of the washers is missing (Customs might have gone through the box, as all the hardware was spilled everywhere). Anything special about them, or will any off-the-shelf replacement suffice?
One of the washers is missing (Customs might have gone through the box, as all the hardware was spilled everywhere). Anything special about them, or will any off-the-shelf replacement suffice?
#77