shuiend

iTrader: (24)

Well I redid all my wiring and I am stuck at the last 2 wires. According to the megamanual 22 is the TPS signal and 26 is the 5vref from the tps. I am in a 94 and I do not know which of the 4 wires coming from the TPS is which.

http://www.madracki.com/miata/images/wiring/94sys.pdf

That is the link for the wiring diagram for the 94. Page 8 and 9 have the wiring for the stock harness. Can any one please figure out which wires coming from thew TPS I am supposed to use.

Braineack

iTrader: (62)

if i read correctly:

RED / BLK - Wiper (TPS)
BLK / BLU - Ground
RED - Switch Idle
LTGRN / WHT - 5vref

mschlang

I think Scott is right, but you can double check that with a multimeter on the blk/blu and ltgrn/wht wires. You should see voltage changing when you open the throttle.

ecugrad

If its pin 26 from the Megasquirt its not 5vref from the tps, its 5v REFERNCE FOR the tps.

richyvrlimited

iTrader: (1)

I didn't use the V/ref at all, I just 'tapped' the signal line. works perfect.

when I cut the signal and 5vref line I got ECU resets every time I let off the throttle.

Braineack

iTrader: (62)

maybe the wot switch ***** stuff up?

cjernigan

iTrader: (13)

I also just tapped my lines for the TPS.