The intake manifold will be fit up to a MSM later this year.
Stephanie |
Originally Posted by Stephanie Turner
(Post 387103)
The intake manifold will be fit up to a MSM later this year.
Stephanie |
I have determined that spool is definitely faster. I finally got my 2.25" gutted cat out of the mix and got my real test pipe on this weekend.
My EBC is still tuned for cold weather, where I took a few hundred rpms out of the target DC% so i didn't have spikes in < 60*F weather. If you notice it's spiking a little so i need to back it out a touch more on a 60*F day. So that for sure means it's faster as well as the fact im hitting 15psi at 3500 before it was closer to 3800-3900 on this same stretch of road in 4th gear. The one thing I found odd is the DC%, I know I have a new FPR. It's supposed to be 1:1 like the stock and i can set the idle pressure basically. I need to run the gauge into the cabin and see what pressure I'm getting in boost, cause it must be over 70psi... I've had to take close to 20 points out of my +4K fuel cells, so I'm guessing all is still kosher, just weird to see a max of only around 55% DC. anyways: http://www.boostedmiata.com/logs/int...oost_again.png looks like it'll be the 10th or 11th when we dyno, brad is out of town this week. |
Nice! I want one. Where did you get the parts to make yours?
__________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
18 lbs.. 2nd gear... coupler blew :)
http://i39.tinypic.com/k2ebr8.jpg 15 lbs.. 3rd gear. My BC duty is all screwed up (as you can see). Should be able to push the spool forward a bit more and post some more accurate logs. http://i43.tinypic.com/33cmb0p.jpg |
So, any updates on when I can get one of these for my 01? My current intake manifold is off the car and I have cash in hand. Should I be looking elsewhere for a manifold?
|
The NB intake manifold has been installed. Should have results in about 7-10 days. Need to make sure you are not going to loose power on one of these.
Stephanie |
did you get enough results on the 1.6 yet?
|
Originally Posted by disturbedfan121
(Post 397415)
did you get enough results on the 1.6 yet?
|
Dynos!!! I am truly interested in this product...
|
Originally Posted by Newbsauce
(Post 397525)
My logs are posted above, I'm not sure who else has the 1.6 mani. I fixed the boost cycles last night and will dyno when I get back from Cancun :)
|
I hope they will modify the stock intake manifolds for cheaper ;)
|
Originally Posted by Braineack
(Post 387036)
how does the MSM meter air?
|
Originally Posted by turbobluemiata
(Post 399358)
I hope they will modify the stock intake manifolds for cheaper ;)
Stephanie |
haha. lets hope so. T-minus 9 days.
|
Any dyno results? thumbs up? down?
|
inconclusive; I have a few issues I have to work out and try again.
http://www.boostedmiata.com/dynos/in...are_boost1.jpg but you can see with 2psi less boost, at redline, i was making torque and eventually made more power. |
Originally Posted by Stephanie Turner
(Post 397305)
The NB intake manifold has been installed. Should have results in about 7-10 days. Need to make sure you are not going to loose power on one of these.
Stephanie |
bump
|
Originally Posted by 16bit
(Post 417315)
bump
are you bumping for this: https://www.miataturbo.net/forum/t35852/ |
All times are GMT -4. The time now is 03:27 PM. |
© 2024 MH Sub I, LLC dba Internet Brands