Anybody know about the LEDs on MS3, Franks writeup doesn't say anything about them. Do I need anything else or just the leds. It looks like Q6, Q7, and Q8 share traces with them.
|
1 Attachment(s)
|
1 Attachment(s)
|
1 Attachment(s)
|
5 Attachment(s)
Desoldering the MS3x:
https://www.miataturbo.net/attachmen...ine=1411699815 Scariest part so far: https://www.miataturbo.net/attachmen...ine=1411699815 Coming Together: https://www.miataturbo.net/attachmen...ine=1411699815 Connector Mounted: https://www.miataturbo.net/attachmen...ine=1411699815 I am and idiot. I started cutting the wrong way. Should be fixable with some glue. https://www.miataturbo.net/attachmen...ine=1411699815 |
1 Attachment(s)
Added U6 and C26-29 for serial:
https://www.miataturbo.net/attachmen...ine=1411702383 Started wiring: http://i57.tinypic.com/zofg2b.jpg |
1 Attachment(s)
|
2 Attachment(s)
Soldering the last wire:
https://www.miataturbo.net/attachmen...ine=1411710437 Completed Harness: https://www.miataturbo.net/attachmen...ine=1411710437 |
1 Attachment(s)
|
Anyone know where I can get an extra DB37 plug?
|
1 Attachment(s)
Originally Posted by aidandj
(Post 1170595)
Anyone know where I can get an extra DB37 plug?
Attachment 238851 |
Well its 130 in the morning and I should have gone to bed half an hour ago. I plugged it in and tried to get it up and running and nothing. I get it to show up and an FTDI device but it can't be detected by windows or osx. I'm stumped. Hopefully someone can spot what I did wrong? And hopefully I didn't destroy anything.
|
Props on the kayaks. I've always wanted to do the same thing with a long-ass canoe.
|
Got some sleep and went back to the lab today. When hooked up to a test bench supply I can connect and flash firmware just fine. But in my car I can't.
|
|
Ok I'm stumped. It worked on the bench but now it won't work installed in my car. Any ideas?
I get 12v at power and ground. And it shows up in my devices. But tuner studio can't connect to it |
1 Attachment(s)
So everything was going great:
Attachment 238848 Smoke everywhere and the wire burnt up. Its too late and it pissed me off so I am going to bed. Any ideas why this happened? The engine continued running while this happened. I have they flyback diodes wired in there. It seems to be the 12v power wire that burnt up. |
Got it running again. Sounds like
Something is up. Last time I had it running it didn't sound like that. |
Success!!!!!!! It is running and driving. Thanks everyone who helped. I'm sure I will have more questions but for now check it out:
|
Nice work getting it running. I like where this thread is headed.
|
All times are GMT -4. The time now is 05:51 AM. |
© 2024 MH Sub I, LLC dba Internet Brands