Aidan's loose oily bunghole actually runs a track lap
#7965
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Can lead to higher consumption. I am planning to delete the squirters.
Pistons will be ceramic coated on top by recommendation of @Savington, he says it helps with oil temps a ton.
Pistons will be ceramic coated on top by recommendation of @Savington, he says it helps with oil temps a ton.
#7967
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Supertech doubles ordered. Found someone with a decent sale going on, picked em up pretty cheap.
Pretty much have everything ordered now. Need to strip a block and get it to the machine shop. and get the pistons back.
Pretty much have everything ordered now. Need to strip a block and get it to the machine shop. and get the pistons back.
#7973
Elite Member
iTrader: (37)
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,441
Total Cats: 1,899
I've got literally everything from the deck of the block to the oil cap, plus 2 or 3 sets of oil lines. This includes all the plastic covers for the timing belt and new o-rings and seals for all the VVT stuff. Stock coil packs and wiring pigtails too. I think the only thing I'm missing is the banjo bolt that goes into the side of the block.
I just want it all gone, it takes up too much space for something I'm never going to use.
I just want it all gone, it takes up too much space for something I'm never going to use.
#7974
Can lead to higher consumption. I am planning to delete the squirters.
Pistons will be ceramic coated on top by recommendation of @Savington, he says it helps with oil temps a ton.
Pistons will be ceramic coated on top by recommendation of @Savington, he says it helps with oil temps a ton.
#7976
Yeah FM's but they are ceramic coated, I'm sure once yours are they will functionally be the same for heat transfer. I only bought FM's because they are supposedly their own design/stronger but pretty sure nobody breaks off the shelf wiseco's anyway. In fact could you take some good pics of the inside of the piston so I could post pics of the FM ones to compare? Could see if there is any difference.
#7977
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Yeah FM's but they are ceramic coated, I'm sure once yours are they will functionally be the same for heat transfer. I only bought FM's because they are supposedly their own design/stronger but pretty sure nobody breaks off the shelf wiseco's anyway. In fact could you take some good pics of the inside of the piston so I could post pics of the FM ones to compare? Could see if there is any difference.