Mine is on an intercooler pipe just after the intercooler. I drilled and tapped it, then screwed it in with RTV silicone as thread sealer. I have heard of drilling and tapping the outlet tank of the intercooler but it is a little more difficult to clean the metal shavings out of it. You can just screw in a pipe plug in the old location you are removing it from to close it off.
|
Originally Posted by sixshooter
(Post 991828)
Mine is on an intercooler pipe just after the intercooler. I drilled and tapped it, then screwed it in with RTV silicone as thread sealer. I have heard of drilling and tapping the outlet tank of the intercooler but it is a little more difficult to clean the metal shavings out of it. You can just screw in a pipe plug in the old location you are removing it from to close it off.
|
My retarded lack of traction
At least you get to hear my sexy rev limiter... babababa
|
I fitted a set of cold plugs, the car is alot better. it even spools better!! no more misfire!
|
What settings did you end up with for the rev limiter?
You didn't need very cold plugs, just gapping down the electrode. Well, a little colder than stock is good. I think the most common is BR7KE or BRKE7 or something. |
ill have to double check man but i think it was 6 out of 8 with a spark only cut. not sure if that's good for the engine though... i have those plugs in now :D i gapped them down to .7mm which is just under .03'' and the car runs way smoother!
|
4 Attachment(s)
im still having issues with my mat.. i havent moved it yet but i fear there may be something else rather than heat soak at play..here are two logs. one is a 10 to 100 mph pull and the second is a log of the idle afterwqards.. i was waatching the MAT guage on the laptop and it would jump from 4 degrees to 16 degree and back in a second.. hopefully its just a wiring issue
|
Just read this thread end to end, nice build, exactly what I want to do.
Side note, what are the measurements on your wheels? They look good |
8 Attachment(s)
long time no update!
Found some rust so ordered some repair panels to fix it https://www.miataturbo.net/attachmen...ine=1375168846 In the meantime this happened bit more work done. https://www.miataturbo.net/attachmen...ine=1375168846 https://www.miataturbo.net/attachmen...ine=1375168846 https://www.miataturbo.net/attachmen...ine=1375168846 https://www.miataturbo.net/attachmen...ine=1375168846 Oil Leak!! https://www.miataturbo.net/attachmen...ine=1375168846 https://www.miataturbo.net/attachmen...ine=1375168846 https://www.miataturbo.net/attachmen...ine=1375168846 Cleaned all the subframe and engine for painting. there was an oil leak from the turbo so thats sorted now. should have panels today or tomorrow. the end is in sight. I also depowered the steering rack so i wont be pushing fluid around for no reason. Feckin car is off the road more often than not. |
2 Attachment(s)
Car was running nicely while it was on the road, pulled without missing a beat. i picked up an EGT sensor so that should provide important feedback. Then the clutch had a poo so im fittting an Exedy Paddle Clutch this week. i also fitted some BC Racing Coilovers and they are mint!
This is what it looked like just before i took it apart again. https://www.miataturbo.net/attachmen...ine=1375169225 https://www.miataturbo.net/attachmen...ine=1375169225 |
Rhys you handsome bastard. You look like fashionista Paul Galvin and chicks come too easy?
Is it still melting in west Cork? |
1 Attachment(s)
I was actually behind the camera at the time.. thats my French mate Nico.. ill pass on the compliment ;)
All the roads are fucked and melted. i was in Asia while the heat wave was on so i missed it :( just for the record, this is what my ugly mug looks like https://www.miataturbo.net/attachmen...ine=1375186323 |
|
I Missed the homoeroticism of miataturbo... Im flattered
|
4 Attachment(s)
Flywheel before lightening
https://www.miataturbo.net/attachmen...ine=1375860365 Flywheel During lightening https://www.miataturbo.net/attachmen...ine=1375860365 https://www.miataturbo.net/attachmen...ine=1375860365 Flywheel After lightening https://www.miataturbo.net/attachmen...ine=1375860365 Job Done! Clutch still on the way should be here for the weekend! Still no major update on the sills.. |
1 Attachment(s)
mmmmmmm clean...
https://www.miataturbo.net/attachmen...ine=1375949864 Did i mention my clutch is on the way? i dont think i did... |
3 Attachment(s)
Made a little more progress with the car last night.
https://www.miataturbo.net/attachmen...ine=1377069850 Bought a repair plate from ebay for reasonable money, and cut it out to fit. https://www.miataturbo.net/attachmen...ine=1377069850 theres the patch welded in for the most part. it still needs a few bits tidied but its almost there. https://www.miataturbo.net/attachmen...ine=1377069850 Before you go to say '' those welds are crap '' please don't, i know they are. its the first time i've ever welded car panels or anything substantial for that matter. i still need to make a section for the edge but its coming along nicely. |
10 Attachment(s)
Update time. I was in the garage all day and cracked on with the drivers side.
https://www.miataturbo.net/attachmen...ine=1377376450 https://www.miataturbo.net/attachmen...ine=1377376450 https://www.miataturbo.net/attachmen...ine=1377376450 https://www.miataturbo.net/attachmen...ine=1377376450 https://www.miataturbo.net/attachmen...ine=1377376450 https://www.miataturbo.net/attachmen...ine=1377376450 im happy with it, and any blemishes will be covered by the stone chip. i also picked up the track tyres and painted my daisies in anticipation :) https://www.miataturbo.net/attachmen...ine=1377376450 https://www.miataturbo.net/attachmen...ine=1377376450 https://www.miataturbo.net/attachmen...ine=1377376450 We then made a start on the passo side https://www.miataturbo.net/attachmen...ine=1377376450 |
1 Attachment(s)
been waiting ages for this update so..
finally !! https://www.miataturbo.net/attachmen...ine=1377857633 |
That's a mean looking little clutch. Are you giving up on street driving? lol.
|
All times are GMT -4. The time now is 08:13 AM. |
© 2024 MH Sub I, LLC dba Internet Brands