Colipto's BP to K swap build thread
#469
Kinda ironically funny that you can't say ---- on a Miata forum!
#471
Elite Member
iTrader: (2)
Join Date: Aug 2016
Location: New Fucking Jersey
Posts: 3,890
Total Cats: 143
I'm pretty ---- about those bolts. I number them and put them back in the same holes. I also clean them with brake cleaner and liberally apply blue Loctite. So far, I have never had any back out on me. I probably will, now that you have cursed me. Dammit.
Kinda ironically funny that you can't say ---- on a Miata forum!
Kinda ironically funny that you can't say ---- on a Miata forum!
Ooops. Sowy bb.
#474
Elite Member
iTrader: (2)
Join Date: Aug 2016
Location: New Fucking Jersey
Posts: 3,890
Total Cats: 143
I just put RTV on the outside too a few days later when everything was dry because I was paranoid and I have to live up to my reputation somehow...
Last edited by ridethecliche; 04-18-2018 at 10:55 PM.
#476
I've never used so much blue loctite on bolts till now, pretty sure I only used my air compressor to torque those down before - Not a good idea
Oh you know, just my exhaust cam - the lobe on the camshaft didn't allow the cam gear to seat fully with a washer in place - also a wheel and a fuel line too!
300+ HP on a virtual dyno would entertain me
Oh you know, just my exhaust cam - the lobe on the camshaft didn't allow the cam gear to seat fully with a washer in place - also a wheel and a fuel line too!
300+ HP on a virtual dyno would entertain me