14 Attachment(s)
First Batch of HD pictures done!
Starting with my favorite Attachment 230637 and then the other good ones. Attachment 230638 Attachment 230639 Attachment 230640 Attachment 230641 Attachment 230642 Attachment 230643 Father and Son centerfold? Attachment 230644 Attachment 230645 Attachment 230646 Had to give dad a go in my car. Where do you think i get all my skillz from? He's the real OG. Attachment 230647 Nothing better than hanging with your mates at a big ol party full of rednecks. Attachment 230648 Attachment 230649 A good time was had by all. Such a great time. Next year will be even crazier. My brain is turning already. Attachment 230650 |
|
7 Attachment(s)
Got some more work done this weekend. Back when I swapped the diff's I didn't have another set of poly bushings, so using the old racers trick I filled the rubber with urathane. It helps but the real deal is better. Got around to putting that together finally.
Attachment 230630 Attachment 230631 Attachment 230632 Since I dropped my subframe down and put new alignment bolts in, My modified ctrl arms to correct that negative camber now went the other direction. So I put the stockers back in. (Red ones) Attachment 230633 Flat facing surfaces right behind a tire... that didn't go over super well with my paint. So a quick toughening up job was applied too. We shall see how this hold up. Attachment 230634 And then a couple low quality pictures from the other night as we were leaving church. Attachment 230635 Attachment 230636 |
Pics don't work on last post.
|
links fixed
|
And tongue is back. Good deal!
|
10 Attachment(s)
Went for a boot in the back yard this weekend. The snow is starting to melt. I was itching to get muddy. Big wall of ice under the surface that I couldn't get over before the ecu got wet and dropped two cylinders.
Attachment 230620 Attachment 230621 Attachment 230622 All that water and the engine still looks awesome. :) Attachment 230623 However going deep without being prepared causes issues. Attachment 230624 Left it over night. Water froze. Had me an unhappy ecu this morning with all that ice. Good thing I got spares. This one has gone into a bag of rice. Attachment 230625 Attachment 230626 In the process of determining my running issues, I remembered that I put the wrong fuel rail spacers in. I couldn't find the right ones at the time. So... thanks to my 3d printer, 18 minutes later I had the correct spacers. Attachment 230627 Attachment 230628 Attachment 230629 |
All times are GMT -4. The time now is 02:53 AM. |
© 2024 MH Sub I, LLC dba Internet Brands