That is one big ol' pupper
|
Parting out the moustache wax?
|
3 Attachment(s)
Pounded out a bunch more stuff today. My volunteers showed up again. They got the roll cage out.
Attachment 182694 I blasted and painted even more bolts as I realized I needed them for different areas of the car. Attachment 182695 And this is where I end the day today. I had a goal of getting it running but... I spent a ton of time looking for misc gaskets and seals for this that and the other. Attachment 182696 |
|
ya that intake did a bit more then I was expecting. I think once the charge pipes are on it will help break things up a bit. I'm going to powder them blood orange too. We'll see. I can always change it.
|
|
4 Attachment(s)
And on today's list we have....
One super oiley turbo charged engine and tranny being removed. This engine probably ranks highest on the most oil covered engine I've ever pulled out of a vehicle in the 11 years I've been doing this job. Previous owner said it burns just a little bit of oil... :trollface: Attachment 182690 The ol not so top secret miata lurkin in the back waiting for parts. Attachment 182691 And we have a gold clutch! Does that mean it's worth more? Anyone know what them little weights are stuck to the springs? Aftermarket on the aftermarket to give more clamping pressure? Attachment 182692 Bits and bobs being reassembled. I think I may have painted and dipped the wrong master cylinder resivoir because it's not fitting to well and I've checked the 6 other miata's I have and none of them have a resivoir that looks like that. UGH! Attachment 182693 Getting lots of you guys checking out the website and facebook page and sending me little encouragements. Appreciate it. Gives me a bit of extra motivation when you guys are excited about this thing too. :) |
Originally Posted by Eppic
(Post 1374573)
And on today's list we have....
One super oiley turbo charged engine and tranny being removed. This engine probably ranks highest on the most oil covered engine I've ever pulled out of a vehicle in the 11 years I've been doing this job. Previous owner said it burns just a little bit of oil... :trollface: [...] |
oh the rings are very very blown out. You could fill a balloon in seconds off the vent tube of the v/c. It's most certainly burning AND leaking oil.
|
God that engine bay looks like it has a few interestingly wrapped christmas presents in it.
Then again its one of the better threads i have seen lately. :bowrofl: |
Can't even hate because you work 10x faster than I do.
Only real dislike is the red. Black would have been a little more understated in contrast to the yellow. |
1 Attachment(s)
No windshield proves to be handy. Got her running today.
Attachment 182662 Well, today she fired up. Now just to get the rest of things in order. |
3 Attachment(s)
When you got deadlines and an oven for powder coating... you work and eat at the same time.
Attachment 182655 Grabbing parts as I need them. Almost done everything underneath the car. Brake lines are done. Exhaust is in. Driveline is in. Fuel lines in. Attachment 182656 We're close. Was hoping to drive it out today under it's own power but I had to stop early as I forgot I had other plans this evening. Attachment 182657 |
I like what you're doing. The color contrast is almost violent. Like maybe something biological is happening under the hood that needs an eye kept on it. :)
|
7 Attachment(s)
Started stripping the wheels for this car.
Attachment 182636 Attachment 182637 The snow came today. I had to enable the Winter Shark unfortunately. Stretched tires and snow = 5th gear 100km/h burn outs down the highway. :D Attachment 182638 Parts everywhere as the build is frantically being assembled. Attachment 182639 Attachment 182640 I keep thinking I'm almost there. Just this and that left... Then I add more to my list. Downside of having ADHD. In your head your pretty much done, then you go look at your list again and go "oh wait... I forgot this and this and this and this" BAH! I just want to drive this thing already. Attachment 182641 And I finished fabbing some metal brackets that do things. Painted them. Now you can watch them dry. You'll see what those are for later! Attachment 182642 Car does run and drive. Just haven't put it on the ground yet. Maybe tomorrow it will get a mobility test. Have a few more fabricating things to construct yet. Like limiting straps............... |
Well.... It moves under it's own power. Apparently this engine needs a little help. But we are one step closer to stage one of this build being complete.
|
"Yo dawg I heard you like dipped things, so I dipped your dipped things!"
In all seriousness you work faster than probably half this website combined, good content, keep it up I like the piktars |
2 Attachment(s)
Windshield is in. Didn't get much done on the car today. After 2 weeks of 16 hour days working on this thing my body finally said "ENOUGH". I went to eat supper and fell asleep immediately following. (This never ever ever ever happens due to ADHD.)
Attachment 182628 Attachment 182629 Looking like we are moving on to interior assembly next. Then body panels and lights and we call that stage 1 complete. Maybe by the end of the weekend? |
It would be possible to do a 3/4 inch body lift kit on the Miata by putting spacers between the body ans subframe at the mounting points. The steel brake lines appear to have enough length to work with minimal bending. You may desire a shifter lever extender and shock extender bolts if you go much higher than that.
|
Originally Posted by sixshooter
(Post 1377085)
It would be possible to do a 3/4 inch body lift kit on the Miata by putting spacers between the body ans subframe at the mounting points. The steel brake lines appear to have enough length to work with minimal bending. You may desire a shifter lever extender and shock extender bolts if you go much higher than that.
|
All times are GMT -4. The time now is 11:20 AM. |
© 2024 MH Sub I, LLC dba Internet Brands