|
So after comparing droop travel between Bilsteins and Xidas (turned out to be Gen2)
https://farm5.staticflickr.com/4430/...a7464a6c_b.jpg 20170924_143104 by concealer404, on Flickr We started tearing the perfectly nice car apart. https://farm5.staticflickr.com/4492/...8863c4fe_b.jpg 20170924_143259 by concealer404, on Flickr NA6 carpet going in. https://farm5.staticflickr.com/4429/...d0caf983_b.jpg 20170924_182512 by concealer404, on Flickr Easily the cleanest deck i've ever seen in an NA/NB. https://farm5.staticflickr.com/4411/...df59bc3a_b.jpg 20170924_182532 by concealer404, on Flickr Black dash in. Jet Stream console mocked up. https://farm5.staticflickr.com/4443/...aeee2cea_b.jpg 20170924_193337 by concealer404, on Flickr Black/Tan not as nice as i was somewhat hoping. Will finish all black conversion. Probably with NA seats. https://farm5.staticflickr.com/4486/...64f54926_b.jpg 20170924_193938 by concealer404, on Flickr To do this week: 1) Remove power steering and replace steering rack with a unit i bought from Vorschlag 2) Swap out ID1000s in favor of stock injectors 3) Swap out 550/350 springs for 700/400 that will be here soonish 4) Sport brake install 5) Plug oil drain at pan 6) timing belt/water pump 7) Have valve cover, intake manifold powdercoated Then re-evaluate. |
Got my grubby little dickbeaters on a minty pair of black cloth NA seats. I like. Monk is a good friend.
https://farm5.staticflickr.com/4454/...549084d7_b.jpg 2017-09-29_06-23-40 by concealer404, on Flickr Remember that time i bought a nice turbo Miata? https://farm5.staticflickr.com/4439/...e59ebfb7_b.jpg 20171001_195522 by concealer404, on Flickr https://farm5.staticflickr.com/4477/...c4424aa4_b.jpg 20171001_195531 by concealer404, on Flickr 15x10 245/40 fits on a 93 LE with a healthy roll/pull! https://farm5.staticflickr.com/4487/...8d8df43e_b.jpg 20171001_163546 by concealer404, on Flickr https://farm5.staticflickr.com/4449/...b27313d6_b.jpg 20171001_163603 by concealer404, on Flickr https://farm5.staticflickr.com/4473/...3b1ab8ba_b.jpg 20171001_164401 by concealer404, on Flickr |
Been a while. Enjoy some disjointed updates.
Removed ID1000s, installed these. https://farm5.staticflickr.com/4466/...895e7ab7_b.jpg 20171008_171108 by concealer404, on Flickr Removed more things. For science. https://farm5.staticflickr.com/4459/...f3a84f9f_b.jpg 20171008_163427 by concealer404, on Flickr Installed a JDM y0 fuel pressure regulator. Because this is necessary when you want to make ~130whp. https://farm5.staticflickr.com/4490/...5116842d_b.jpg 20171008_165146 by concealer404, on Flickr Making progress on making engine bay look acceptable. https://farm5.staticflickr.com/4487/...50671cdb_b.jpg 20171008_191259 by concealer404, on Flickr |
More things came in the mail for the mildly built street car.
Delrin diff bushings and vent windows. https://farm5.staticflickr.com/4510/...fbe8bcc4_b.jpg 20171007_161717 by concealer404, on Flickr Spark plugs, NB2 master cylinder, Stoptech pads, clutch master and slave. (Sport rotors not pictured) https://farm5.staticflickr.com/4456/...9cc8db5f_b.jpg 2017-10-09_11-31-14 by concealer404, on Flickr Braided brake and clutch lines, 949 Racing QMAX reroute, poly MSM rear sway bar bushings, 949 lugs and stems, and the world's biggest piece of shit $350 muffler from Racing Beat. https://farm5.staticflickr.com/4465/...b83ebc1d_b.jpg 20171010_172319 by concealer404, on Flickr 15x8.5 Hypergrams https://farm5.staticflickr.com/4451/...8d7620e8_b.jpg 20171010_170243 by concealer404, on Flickr Mmmmm purdy. https://farm5.staticflickr.com/4506/...c5caf027_b.jpg 20171014_110144 by concealer404, on Flickr The VR1s mounted pretty wide. https://farm5.staticflickr.com/4444/...4d9e889c_b.jpg 20171016_174315 by concealer404, on Flickr New brake booster hose, original was cut up from turbo install. https://farm5.staticflickr.com/4496/...b2b824b7_b.jpg 20171017_143348 by concealer404, on Flickr Console screws and dash blank plates. https://farm5.staticflickr.com/4464/...7c719e79_b.jpg 20171019_173814 by concealer404, on Flickr |
Back to work. Impossibly clean motor.
https://farm5.staticflickr.com/4498/...4e9fd996_b.jpg 20171021_175849 by concealer404, on Flickr Installed BP5A intake cam (MSM/JDM y0), water pump, timing belt, 949 front blockoff plate, used a freeze plug behind it because i'm paranoid and had one on the shelf. https://farm5.staticflickr.com/4481/...25150376_b.jpg 20171021_204839 by concealer404, on Flickr This really is a beautiful piece. Now i need to buy two more. Sigh. https://farm5.staticflickr.com/4495/...69acb7da_b.jpg 20171021_205901 by concealer404, on Flickr Removed the swaybars, was pleasantly surprised when the endlinks didn't need to be cut of. First time for everything! https://farm5.staticflickr.com/4461/...7fd41e71_b.jpg 20171024_172837 by concealer404, on Flickr Removed entire brake system. You only get pictures of the lines. https://farm5.staticflickr.com/4485/...d47d0904_b.jpg 20171024_175005 by concealer404, on Flickr |
Got a care package from V8 Roadsters. $25.17 shipping. Medium flat rate, but shipped Fedex. Shandelle is a sweetheart, i love his parts, and i'm ok with another long wait time (ordered October 4th), but...
https://farm5.staticflickr.com/4447/...449cf643_b.jpg 20171031_172637-1 by concealer404, on Flickr Endlinks. One pair. Ordered two. Sadpanda. https://farm5.staticflickr.com/4464/...6bb62cb8_b.jpg 20171031_180423 by concealer404, on Flickr Motor mounts. Seem nice. Base plate shows coated on website. This is not. Also: Missing cleviseseseseseses. https://farm5.staticflickr.com/4514/...c3510435_b.jpg 20171031_181925 by concealer404, on Flickr Missing: one pair endlinks, base plate finishing, motor mount clevis, one pair steering rack bushings. SIGH. |
Too bad I just now found this thread. I could have shipped you most of your wish list on page 1 in one big box!
|
PM me with what you've got. Still after the world's nicest shifter surround (black only), some super clean door panels (or else i'll just LRBs and wrap them myself), NB2 hvac control panel/box, BP5A ecu, and NB2 tails.
|
I have the stuff you already bought. :cry:
I really need to get around to making a for sale thread in the classifieds, but a lot of my junk would probably sell better on m.net, unfortunately. Good looking build so far, but where's the trubo? |
Originally Posted by Steve Dallas
(Post 1449048)
I have the stuff you already bought. :cry:
I really need to get around to making a for sale thread in the classifieds, but a lot of my junk would probably sell better on m.net, unfortunately. Good looking build so far, but where's the trubo? |
I want a pair of those motor mounts too, maybe we're supposed to paint them :dunno:
|
Originally Posted by sonofthehill
(Post 1449132)
I want a pair of those motor mounts too, maybe we're supposed to paint them :dunno:
I'm finding it pretty hard to stay motivated between this and Racing Beat's bullshit. |
Sorry to hear it.
|
It's generally frustrating to me when places don't offer usps since it's often cheaper for the customer. I just paid 5-10 bucks more for shipping for something from CA that was sent Fedex... Except it's going to take more time to get here. So I paid extra for something to get here late and now I won't get it before the weekend so I won't be able to install it when I have time.
I legit see it as folks being lazy when it comes to shipping. At least offer flat rate... Your picture just takes the cake though. That's bogus. |
I don't really have that much issue with the shipping costs. He shipped Fedex. I'm sure it cost $25 to do that. It's just a "sigh" moment to see it in a flat rate. It's nowhere near as bad as Goodwin shipping my M-Tuned brackets in a box the side of a Miata trunk earlier this year.
My issue is the 4 week wait for parts i needed weeks ago, to end up with an order that is incomplete and useless. I will order from V8R again, because for some stuff, he's just the only game in town, and i like his parts, and i like talking to him. But this one is harder to swallow, since he wasn't the only game in town for ANY of the parts that i ordered this time. |
Shandelle probably didn't say it because he's not wanting anybody to feel sorry for him but he had a horrific car accident and totaled his NC with the LFX swap and has been in the hospital for the last few weeks having his leg rebuilt. He's not one to make excuses typically but I think some need to be made for him in this case. He's just gotten back home but is mostly immobile and pretty fucked up.
|
Ugh. :( I'm really sorry to hear that. :(
I hadn't heard anything from anyone. Haven't had any contact with him since the order was placed. That sucks super bad. I'll be sure to wish him a fast recovery over the phone. |
I would advise against the delrin diff mounts. I briefly ran PU diff bushings and instantly started hating my car. Went back to IL Motorsport rubber mounts (40% stiffer than stock, like Mazda Motorsport mounts) but still wayyyy better than PU, let alone delrin, in terms of NVH.
|
Originally Posted by Eunos91
(Post 1449205)
I would advise against the delrin diff mounts. I briefly ran PU diff bushings and instantly started hating my car. Went back to IL Motorsport rubber mounts (40% stiffer than stock, like Mazda Motorsport mounts) but still wayyyy better than PU, let alone delrin, in terms of NVH.
Purple car has delrin diff mounts. They're awesome. No increase in NVH that i can tell, shifts feel great. The purple car was perfect last year for DD duties other than exhaust noise, not having a stereo, or A/C. I'm literally just building that car again. But with a quieter exhaust, full interior, and A/C. (And softer 62 duro mounts instead of AWR 70s, but the AWRs would have been 100% ok.) |
Aye, go ahead then :) just wanted to warn you in case you didn't have any experience in that regard.
|
| All times are GMT -4. The time now is 05:05 AM. |
© 2024 MH Sub I, LLC dba Internet Brands