Exocet EFR
#172
Junior Member
Thread Starter
iTrader: (1)
Join Date: Jan 2016
Location: Humble, TX
Posts: 160
Total Cats: 29
I guess I could add a muffler or bring the exhaust all the way out the back, but currently running 3" with a 22" resonator and a turndown at the diff. 6th at 65 was not enjoyable, but with the 5 speed it was tolerable and could still have a conversation with the passenger.
#173
I guess I could add a muffler or bring the exhaust all the way out the back, but currently running 3" with a 22" resonator and a turndown at the diff. 6th at 65 was not enjoyable, but with the 5 speed it was tolerable and could still have a conversation with the passenger.
#174
Junior Member
Thread Starter
iTrader: (1)
Join Date: Jan 2016
Location: Humble, TX
Posts: 160
Total Cats: 29
Almost 2 years since the last update on this...
Running E85 only
Swapped out Trackspeed COPs for IGN1As and Magnecor wires
275/50/15 rear tires
Swapped 6258 for 6758
Skunk2 manifold
DW300 pump
Finally hit the dyno yesterday, ran into some issues with the head gasket leaking at boost levels over 20ish psi. But managed to make 420hp 407tq @25psi and 12-14* peak timing.
I'm maxing out the ID1000s, which I didn't expect so I'm going to send them out to be tested but will probably add injectors to the next list of things to upgrade.
There is still some room to optimize the boost control for spool, and obviously the timing.
Dyno charted in MPH not RPM.
Running E85 only
Swapped out Trackspeed COPs for IGN1As and Magnecor wires
275/50/15 rear tires
Swapped 6258 for 6758
Skunk2 manifold
DW300 pump
Finally hit the dyno yesterday, ran into some issues with the head gasket leaking at boost levels over 20ish psi. But managed to make 420hp 407tq @25psi and 12-14* peak timing.
I'm maxing out the ID1000s, which I didn't expect so I'm going to send them out to be tested but will probably add injectors to the next list of things to upgrade.
There is still some room to optimize the boost control for spool, and obviously the timing.
Dyno charted in MPH not RPM.
#175
Holy bejeesus, that car must be a beast! How are the RS4's handling the power? I'm planning on switching to RC1's to help with traction, my VR1's in the same size as yours just aren't cutting it with much less power.
Edit: saw you are running 275's now. What tire and how are they holding up with that power? Post some pics if you get a chance. Would love to see what it looks like now.
Edit: saw you are running 275's now. What tire and how are they holding up with that power? Post some pics if you get a chance. Would love to see what it looks like now.
#176
Junior Member
Thread Starter
iTrader: (1)
Join Date: Jan 2016
Location: Humble, TX
Posts: 160
Total Cats: 29
I'm currently running the RS4's in the front, and Mickey Thompson ET Street S/S 275s in the rear. The RS4's as you'd expect presented some traction challenges even before I put the 6758 on there.
Thread
Thread Starter
Forum
Replies
Last Post
psyber_0ptix
Miata parts for sale/trade
2
09-17-2019 03:08 PM
orlmiata
DIY Turbo Discussion
6
10-16-2017 09:26 PM
FAB
Fab9 Tuning - Miata Performance Parts
49
11-17-2015 05:27 PM