When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
If it's tapped with the right thread pitch then I suppose that it would. My FM IC - circa 2010 - didn't have a bung, so I drilled and tapped it myself and it's been working w/ a GM IAT sensor ever since.
Thanks for your response. My FM IC is 12/19 with the bung it is even in their install video. Just wondered if this was an appropriate spot for the GM IAT.
Yes, that is where I put mine, and it seems to work.
But I flipped the intercooler, so it is in the lower right corner, after the IC cools the air, which is a better place to make the measurement. You just loose the FM logo as it now faces inwards.