My big turbo setup
#1
My big turbo setup
ENGINE
Head stock
Cams ΜΚ1 90-93 lightly modified
COMETIC gasket
ARP studs
JE Pistons 1mm oversize
TOTAL SEAL rings gapless 2nd
PAUTER rods
Threemetallic rod and main bearings
Comretion ratio 9,2/1 ++
COMPONENTS
Τurbo GT2876R
Stainless steel exhaust manifold
Downpipe and exhaust 3" full inox
Custom front mount i/c with 60 mm piping
FORGE blow-off valve
JR filter
Custom clutch kit
FUEL SUPPLY
8 injector modified intake manifold with 2 fuel rails
4 extra injectors bosch 320 cc/min
4 stock injectors from 1.8 MK1 miata 230 cc/min
WALBRO fuel pump HP 255 lt/hr
ELECTRICS
ECU stock with overclock
GREDDY E-manage blue for extra injectors,stock injectors and timing tuning
GREDDY Profec b-spec II boost controler
Boost,EGT and a/f ratio gauges by AUTOMETER
Head stock
Cams ΜΚ1 90-93 lightly modified
COMETIC gasket
ARP studs
JE Pistons 1mm oversize
TOTAL SEAL rings gapless 2nd
PAUTER rods
Threemetallic rod and main bearings
Comretion ratio 9,2/1 ++
COMPONENTS
Τurbo GT2876R
Stainless steel exhaust manifold
Downpipe and exhaust 3" full inox
Custom front mount i/c with 60 mm piping
FORGE blow-off valve
JR filter
Custom clutch kit
FUEL SUPPLY
8 injector modified intake manifold with 2 fuel rails
4 extra injectors bosch 320 cc/min
4 stock injectors from 1.8 MK1 miata 230 cc/min
WALBRO fuel pump HP 255 lt/hr
ELECTRICS
ECU stock with overclock
GREDDY E-manage blue for extra injectors,stock injectors and timing tuning
GREDDY Profec b-spec II boost controler
Boost,EGT and a/f ratio gauges by AUTOMETER
#6
WOW! That's some blue bling!!! I really like it. It's very clean... and really simple. We need dyno graphs!!!
I think I see that vacuum line running down to his wastegate... you can see it pretty clear in the third pic. What kind of WG is that?
And you'd better get religious about heat shielding in there or you're gonna melt stuff!
I think I see that vacuum line running down to his wastegate... you can see it pretty clear in the third pic. What kind of WG is that?
And you'd better get religious about heat shielding in there or you're gonna melt stuff!
#10
Wow, that looks great! And your name fits after seeing the size of your turbo!
As for tuning, his setup, while more complicated in terms of wiring and the extra rail, should actually be easier to tune. Off boost the stock ECU controls everything with the stock injectors so nothing has changed or needs to be done, and in boost the emanage simple retards timing and adds fuel to the extra set of injectors. It actually makes the off boost tuning that you usually need for much larger injectors non-existent so no lumpy idle or off boost issues.
As for tuning, his setup, while more complicated in terms of wiring and the extra rail, should actually be easier to tune. Off boost the stock ECU controls everything with the stock injectors so nothing has changed or needs to be done, and in boost the emanage simple retards timing and adds fuel to the extra set of injectors. It actually makes the off boost tuning that you usually need for much larger injectors non-existent so no lumpy idle or off boost issues.
#12
I like the extra injectors, thought about doing that down the road instead of the common 550's as to avoid idle problems and low speed crap sometimes associated with that. In fact its the same thing FM used to do with the NB FM2 kits a while back and it seemed to work pretty good for them.
hmmmmm
hmmmmm
#14
2.Driveability
3.Because I still have the stock ECU in my miata using piggyback solution, I prefer to have the extra fuel I need on boost situations, from an extra 4inj. so my ECU has no relation to my extra needs of fuel.
Sorry but I can't explain exactly what I want to say.
#17
As for tuning, his setup, while more complicated in terms of wiring and the extra rail, should actually be easier to tune. Off boost the stock ECU controls everything with the stock injectors so nothing has changed or needs to be done, and in boost the emanage simple retards timing and adds fuel to the extra set of injectors. It actually makes the off boost tuning that you usually need for much larger injectors non-existent so no lumpy idle or off boost issues.
We have made some little changes at off boost situation (advance timing and some changes to the additional inj.) and at boost we are using the sub inj. map and the other 2 maps for retard the timing and addit. inj.
#20
Update with some changes (cams,turbo manifold,external wg,radiators,transmission,shocks,gauges,etc)
My set up now, is
ENGINE 1600cc Β6 DOHC 16v
JE pistons custom order 79mm
TOTAL SEAL rings gapless 2nd
PAUTER rods
COMETIC head gasket
ARP bolts
High quality main and rod bearings
ΗΚS cams 264ο
CR 9,3/1
Τurbo GT2876R
TIAL external wastegate 38mm
Custom long tubular manifold with 42 mm pipes
Downpipe and exhaust 3"
High pressure oil feed-return and water lines
Full inox 60mm piping
SAMCO hoses
Ιntercooler tube and fin 24x72x6 cm
FORGE blow off valve
Intake manifold custom 8 injectors set up with custom stainless fuel rail
4 extra injectors bosch 320 cc/min
4 stock injectors 1.8 230 cc/min
WALBRO HP 255 lt/hr fuel pump
ADR aluminium radiator
Thermostat 82ο
TRD 1,5 bar radiator cap
MAZDASPEED oil cap
MAGNECOR kv85 plug wires
DENSO platinum plugs
SIMOTA cone air filter
SIMOTA breather filter
ECU stock with overclock for rising the rev limiter
GREDDY E-manage blue + GREDDY map sensor 3.5 bar
GREDDY Profec b-spec II boost controler
AUTOMETER boost gauge
AUTOMETER pyrometer
AUTOMETER wideband kit
RX7 FD3s transmission
220mm flywheel from bp engine
Custom 6-pad clutch kit
EIBACH springs
KYB AGX
BMW 325 E36 front brake calipers
High performance 288mm rotors
High pressure brake lines
ADVANTI 15" lightweight wheels
ΤΟΥΟ R888 205/50/15 tires
MAZDASPEED motor mounts
My set up now, is
ENGINE 1600cc Β6 DOHC 16v
JE pistons custom order 79mm
TOTAL SEAL rings gapless 2nd
PAUTER rods
COMETIC head gasket
ARP bolts
High quality main and rod bearings
ΗΚS cams 264ο
CR 9,3/1
Τurbo GT2876R
TIAL external wastegate 38mm
Custom long tubular manifold with 42 mm pipes
Downpipe and exhaust 3"
High pressure oil feed-return and water lines
Full inox 60mm piping
SAMCO hoses
Ιntercooler tube and fin 24x72x6 cm
FORGE blow off valve
Intake manifold custom 8 injectors set up with custom stainless fuel rail
4 extra injectors bosch 320 cc/min
4 stock injectors 1.8 230 cc/min
WALBRO HP 255 lt/hr fuel pump
ADR aluminium radiator
Thermostat 82ο
TRD 1,5 bar radiator cap
MAZDASPEED oil cap
MAGNECOR kv85 plug wires
DENSO platinum plugs
SIMOTA cone air filter
SIMOTA breather filter
ECU stock with overclock for rising the rev limiter
GREDDY E-manage blue + GREDDY map sensor 3.5 bar
GREDDY Profec b-spec II boost controler
AUTOMETER boost gauge
AUTOMETER pyrometer
AUTOMETER wideband kit
RX7 FD3s transmission
220mm flywheel from bp engine
Custom 6-pad clutch kit
EIBACH springs
KYB AGX
BMW 325 E36 front brake calipers
High performance 288mm rotors
High pressure brake lines
ADVANTI 15" lightweight wheels
ΤΟΥΟ R888 205/50/15 tires
MAZDASPEED motor mounts