Notices
DIY Turbo Discussion greddy on a 1.8? homebrew kit?

TD04 rattle @ 3-4k rpm when over run

Old Oct 31, 2013 | 07:52 AM
  #1  
elior77's Avatar
Thread Starter
Senior Member
 
Joined: Nov 2012
Posts: 650
Total Cats: -480
From: Israel
Default TD04 rattle @ 3-4k rpm when over run

Hey,

I enjoy my miata turbo for a year now, after taking care of more impotent things I can now take care of the small things.

Well, I get a loud rattle sound from the turbo (I'm almost sure) when in over run (0% tps when rpm going down) from 4k rpm to 3k rpm.

It sounds like a washer "dancing" on a screw freely.

It comes on only when the car is warm.

I took out the heat shiled and the air filter with its pipes to see maybe the noise coming from them, but no.

Any idea ?

Cheers

Last edited by elior77; Oct 31, 2013 at 08:36 AM.
Old Oct 31, 2013 | 08:32 AM
  #2  
olderguy's Avatar
AFM Crusader
iTrader: (19)
 
Joined: Oct 2004
Posts: 4,716
Total Cats: 364
From: Wayne, NJ
Default

Are you sure the BOV is open?
Old Oct 31, 2013 | 08:34 AM
  #3  
elior77's Avatar
Thread Starter
Senior Member
 
Joined: Nov 2012
Posts: 650
Total Cats: -480
From: Israel
Default

yes, I'm @ as low as 12kpa MAP
Old Oct 31, 2013 | 10:48 AM
  #4  
Fireindc's Avatar
Elite Member
iTrader: (13)
 
Joined: Dec 2006
Posts: 7,705
Total Cats: 904
From: Taos, New mexico
Default

Is the wastegate arm tight?
Old Oct 31, 2013 | 10:48 AM
  #5  
elior77's Avatar
Thread Starter
Senior Member
 
Joined: Nov 2012
Posts: 650
Total Cats: -480
From: Israel
Default

yes...
Old Oct 31, 2013 | 12:22 PM
  #6  
ACiFiC's Avatar
Junior Member
 
Joined: Jan 2011
Posts: 84
Total Cats: 1
From: Winnipeg, Canada
Default

Sounds like it could be pinging. Any chance you can get an audio clip depending on how audible it is?
Old Oct 31, 2013 | 12:26 PM
  #7  
Erat's Avatar
Elite Member
iTrader: (5)
 
Joined: Oct 2011
Posts: 5,718
Total Cats: 830
From: Detroit (the part with no rules or laws)
Default

The TDo4 on the smurf i built had a rattle. Same thing.

Tightened the arm up and



The wastegate is bad internally. Well that's what we've come up with. Gotta rig up a new wastegate and we'll know for sure.
Attached Thumbnails TD04 rattle @ 3-4k rpm when over run-1383586_10152544023181091_652774848_n.jpg  
Old Oct 31, 2013 | 12:42 PM
  #8  
greddygalant's Avatar
Senior Member
iTrader: (3)
 
Joined: Nov 2011
Posts: 771
Total Cats: 39
From: Beaverton, OR
Default

have you taken the intake off and checked for shaft play? I had a very similar noise when my car was warm coming from the turbo and my turbo was shot shaft play up the wazoo, any oil being burnt on overrun?
Old Jan 7, 2014 | 06:29 AM
  #9  
elior77's Avatar
Thread Starter
Senior Member
 
Joined: Nov 2012
Posts: 650
Total Cats: -480
From: Israel
Default

It was the EGR tube !
Old Jan 7, 2014 | 07:54 AM
  #10  
Braineack's Avatar
Boost Czar
iTrader: (62)
 
Joined: May 2005
Posts: 80,552
Total Cats: 4,368
From: Chantilly, VA
Default

help gays, my cars rattles in overrun in the sweet spot of resonance rpm.
Old Jan 7, 2014 | 09:01 AM
  #11  
Leafy's Avatar
Elite Member
iTrader: (1)
 
Joined: Jun 2012
Posts: 9,491
Total Cats: 105
From: NH
Default

Originally Posted by ACiFiC
Sounds like it could be pinging. Any chance you can get an audio clip depending on how audible it is?
Hard to knock when there's no fuel being injected and at very low load.
Old Jan 7, 2014 | 02:25 PM
  #12  
elior77's Avatar
Thread Starter
Senior Member
 
Joined: Nov 2012
Posts: 650
Total Cats: -480
From: Israel
Default

Originally Posted by Braineack
help gays, my cars rattles in overrun in the sweet spot of resonance rpm.
Not any more and I'm so gay about it
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Full_Tilt_Boogie
Build Threads
84
Apr 12, 2021 04:21 PM
90 Turbo
MEGAsquirt
19
Oct 19, 2015 03:23 PM
The Gleas
MEGAsquirt
3
Oct 1, 2015 09:30 AM
JesseTheNoob
DIY Turbo Discussion
15
Sep 30, 2015 02:44 PM
viriiguy
General Miata Chat
5
Sep 28, 2015 07:39 PM


Thread Tools
Search this Thread

All times are GMT -4. The time now is 10:37 AM.