Disabling EGO correction authority > unplugging and or cutting...but I'm not here to split hairs, I'm here to e-thug. Now, move along, there's nothing to see here.

 

Moving along

 

Bryan, you need a firmware update on your LC-1. I've not had any issues since I got rid of the Ver. 1.10 firmware. I've posted all the LC-1 firmwares here (see post #68):

https://www.miataturbo.net/showthrea...t=55737&page=4

 

I also will look into the firmware.

I picked up the car this morning and made the 115ish mile drive back to richmond. With having a new clutch it in (yes i know not the best idea to put a new clutch it in with no break in) I was not able to really roll through the gears. I did do some 3/4 throttle pulls on the interstate and it was quite fun. I would say it felt about the same as my speed3 did.

When I got to the shop the car had not been started today. It turned right over and idled with 0 problems. the idle was a little higher than i expected but settled down and was very smooth. The car really drives like it did before I started the work.. if not a little smoother.

I was very very worried about it but I think it is good and I am very happy with the service I got.

I will post the maps later today and dyno sheet.

have to get to work now.

 

Thanks man - I appreciate that! You get a prop

 

been busy so just getting around to posting the info. The car is running good and have had no problems. so far very happy with it.