miatauser884

iTrader: (11)

RC fuel injection is closed until Jan 4th. I sent them an email anyway.

I recently realized that my cleaned and flowed pnp 550cc purple tops are not pnp anymore because I have RC injector connectors spliced into my factory harness.

Does anyone know if my RC440 injectors can be modified by RC to flow more fuel? If they can, then I will just sell my pnp 550s and have the RC440s reworked.

webby459

iTrader: (8)

You can up base rail pressure by ~25%, if you have an afpr.

Faeflora

iTrader: (2)

If you use a cobalt bit drill you can embiggen the injector holes but makes sure to wrap tape around the bit so you don't puncture the wiring.

Ben

iTrader: (33)

Reflowed injectors tend to suck (crappy spray patterns).
Much easier to fix the inj harness. Either fix the one you got on the car or get a new (used) harness. Most/All miata injection harnesses unclip from the main harness.

miatauser884

iTrader: (11)

Sounds like I need to scrounge up some stock clips since mine is already been wired for sequential. I'll just sell the RC440s.

Thanks

webby459

iTrader: (8)

I may have a set of oem injector connectors as part of the half-loom that came with my longblock. Do you want me to check, I would sell them to you real cheap?

miatauser884

iTrader: (11)

yes, please check for me. I'd appreciate it.

2k6750

iTrader: (6)

I'll give ya what you give him for the modified harness that fits the 440's. ::Edit Sorry I got excited. Just saw it's only the clips.

webby459

iTrader: (8)

djp0623, the engine loom I have from the 97 is complete, not hacked up at all like I thought it would be. The problem with it, however, is that the clips for the injectors are pretty broken in the area of the tabs that engage the injectors. I am sending you a PM.