Stein

iTrader: (46)

Hakan,

I sent an email to get a quote with oil pressure sensor and shipping to USA. I am ready to order when you get a quote to me and best way to pay.

Maxiq4

Hi Stein

Im send an email today.
also Im check postoffice for shipping cost
its 20$

maxidisplay 260$
oil pressure sensor 65$
shipping 20$

total : 345$


wideband afr
oil pressure
oil temp
water temp
battery voltage
rpm
+ TPS + EGT (if you want)



edit:

oil pressure sensor



free oil and water temp sensor

paNX2K&SE-R

iTrader: (8)

Are you able to send 2 of them in the same box for $20 (i.e. is it a flat rate box)?

Stein

iTrader: (46)

I think I can see where you are going but with this, but with it only being $20 now to ship and another $6.00 to get one to you, it isn't worth the hassle for $14. If shipping was a bunch it could be worth it.

<--- Waiting for Paypal address so I can place my order. Can't wait to get this installed.

Now, if I misunderstood and you need two in your neck of the woods please disregard the above comment.

paNX2K&SE-R

iTrader: (8)

I need 2, one for the Miata, and one for the LS1 S13.

Stein

iTrader: (46)

winning

Godless Commie

iTrader: (2)

I spoke with Hakan on the phone, apparently two of these units do fit in a flat rate box. So, yes, two can be shipped for 20 bucks.

He would need your input for configuring the two units, tho.

paNX2K&SE-R

iTrader: (8)

Cool, thanks for asking about that. I sent him an email earlier today.

In some of the pics of the display it shows one parameter in a larger font than the others, and also some screen shots where only one parameter is being displayed in a very large font. Are these options that one can set/toggle through the menu with the control buttons?

Maxiq4

hi
yes you can select what you want with buttons
also you can select startup menu in the setup
if you choose peak menu, always peak displayed first when power on

menus:
Full (all values displaying character base)
Main (one large font and others normal)
Peak (character base and display peak values)
Graph (4 important input displayed and graphic bars)

other menu`s single large font and display their peak values
Afr
Egt
Rpm
Oil pressure
Volt
etc..


note:
I need yours map sensors details for calculate pressure
brand name, part number, picture what you have ..

TorqueZombie

iTrader: (6)

If need be can you provide a MAP sensor (at a price of course)? My MAP is inside the hydra and to my knowledge I can't tap off it. Actually kinda thinking this was a nice idea for data logging on the bike, not that I know what I'd need. Just a noob with ambitions.

Godless Commie

iTrader: (2)

Yes, a MAP sensor can be provided, but he can give you a range of part numbers to choose from, so you can save on shipping, etc..
That's exactly what I did. I used a GM MAP sensor.

Godless Commie

iTrader: (2)

Watch the two videos I have posted in the first couple of posts here. One shows what the gauges can do, and the second one takes you through the setup.

Stein

iTrader: (46)

Hakan,

I emailed you again to get your Paypal address so that I can send the money. Please let me know what your Paypal address is.

mx-p5

iTrader: (2)

oh this is good!

I'm currently sourcing my own carnival ride display for my car, but to have one screen display everything? Oh yes

tag for further study

Stein

iTrader: (46)

Payment sent. Looking forward to getting this installed. I'm worried about running the car on a new V8 install without good oil and water temp and pressure data.

Maxiq4

thanks received

mx-p5

iTrader: (2)

maybe a stupid question, but this requires adding the sensors? Or does it wire into factory sensors?

paNX2K&SE-R

iTrader: (8)

I'm planning on using GM 3 bar map sensors part #12223861. Hakan, is the oil pressure sender that you use a universal one that I can buy here in the US?

Maxiq4

I trying explain

we can use some factory sensors
TPS sensor and MAP sensor good example

but other factory water temp, oil temp, oil pressure we can not use.

Maxiq4

GM 3 bar map no problem

if you can tell me oil pressure details, I trying use.
maybe some info write on sensor
pressure and resistance values needed