It is common to run a dwell table, but MS2 doesn't support that. My latency settings are a bit old but I don't have an issue with that. It is not all intentionally different, just what I found solved my problems. MS2 also doesn't seem to support sequential ignition so I can only dwell 5.5, with sequential you could dwell much higher. As I recently mentioned in another post, in my experience you don't want to send a bunch of current to your coils, when you are trying to send a bunch of current to the starter.

 

Oops, forgot the IAT corrections, but they are basically nil like the voltage corrections. I do think dwell tables are usually RPM based as opposed to load, because at high rpm you have less time to dwell.